Can you import a picture into Inventor?

On the ribbon Sketch tab Insert panel, click Image . Start in a drawing sketch. Click Insert, and then select Insert Image. Click the drawing sketch.

How do I emboss a logo in Inventor?

Emboss or Engrave a Face or Plane

  1. Click 3D Model tab Create panel Emboss .
  2. Using the Profile selector, click in the graphics window to select one or more profiles (sketch geometry or text) to emboss or engrave.
  3. Choose an emboss type:
  4. Specify the options associated with the type of emboss you’re performing:
  5. Click OK.

How do you decal an image in Inventor?

To create decals, you insert an image in a sketch, position it using constraints and dimensions, and then apply it as a decal using the Decal command on the 3D Model tab. If you create the decal on a part instead of a surface, use the Delete Face command to remove unneeded faces.

How do I add a logo to Inventor Title block?

Select Image from the Insert panel of the Sketch tab on the Ribbon. You are prompted to pick on a location or two corners to define the placement of an image. Browse for the image file to be inserted. In the Open file dialog box, once your file is selected, be sure to un-check the box that says LINK.

What is emboss in Inventor?

The Emboss feature raises or recesses a profile relative to the model face by a specified depth and direction. The embossed area can provide a surface for a decal or painting. A recessed embossed area can provide clearance for another component in an assembly (not available in Inventor LT).

What is a decal sheet?

A decal (/ˈdiːkæl/, US also /dɪˈkæl/, CAN /ˈdɛkəl/) or transfer is a plastic, cloth, paper, or ceramic substrate that has printed on it a pattern or image that can be moved to another surface upon contact, usually with the aid of heat or water.

How do you put a picture on a curved surface in Inventor?

Pick the workplane you made as a sketch plane. From the Sketch Panel, near the bottom, you’ll see an “Insert Image” command. Browse for your image, place it accordingly, and Finish Sketch. Select the Decal command, you will have an option for wrapping it to the face.