Can you connect a router to a switch?

Connect an Ethernet cable to one of the ports at the back of the switch, then connect the other end to one of the Ethernet ports at the back of the router.

How do I configure a router with a switch in Packet Tracer?

Step1: Open the Cisco packet tracer. Step2: Drag and drop any series of the router from the bottom of the interface into the middle of the working area. Step 3: Click the Router ->select then Physical->select then WIC-IT->switch off the router. Add serial port -> Switch ON the router.

How do switches and routers work together?

While a network switch can connect multiple devices and networks to expand the LAN, a router will allow you to share a single IP address among multiple network devices. In simpler terms, the Ethernet switch creates networks and the router allows for connections between networks.

Can you put a switch before a router?

Installing a networking switch can be done in two ways, the first—in connecting order—is placing it after the modem and before the router, and the second is placing it after a router that is connected first to the modem (Modem—>Router—>Switch).

Which cable is used to connect router to switch?

Normal Ethernet Cables This type of cable is a “regular” or straight-through cable. You use this type of cable to connect a PC to a hub/switch or a router to a switch. You should also know that there are two standards for how the colors are arranged on this cable.

Can I put a switch before my router?

How do I configure a switch?

How to configure Cisco switch?

  1. Initial command prompt “Switch>” appears on the screen.
  2. Type “enable” next to it and press “Enter”.
  3. This will take you into the “EXEC” mode, also known as the Global Configuration mode.
  4. Go into configure mode using configure terminal.
  5. Enter the configuration commands one per line.

Do I need both a router and a switch?

In practice, what this means is that routers are necessary for an Internet connection, while switches are only used for interconnecting devices. Homes and small offices need routers for Internet access, but most do not need a network switch, unless they require a large amount of Ethernet* ports.

Does a switch split bandwidth?

A vital difference between a hub and a switch is that all the nodes connected to a hub share the bandwidth among themselves, while a device connected to a switch port has the full bandwidth all to itself.

Should a switch go before or after router?

Assuming a normal residential setup, you need to put the switch after the router. because the modem will only talk to the first computer that talks to it. To share the connection, you need a router. Thus, you usually want that “first device” to be a router.