Can I use my BISSELL vacuum without a filter?

If your particular vacuum continues to work without its HEPA filter then you can certainly use it without one. You might find the suction gets better. However, without the HEPA filter, your vacuum can’t filter out some of the tiny dust particles it sucked up from your floor.

How long does a BISSELL vacuum filter last?

It is recommended to clean or replace your filters every 3-6 months depending on use. This filter is washable – Clean by hand washing in warm water. A mild detergent may be used if desired. Allow the filter to air dry completely before replacing.

How often should I replace my BISSELL vacuum filter?

You should check both filters monthly and wash or replace them every 3-6 months, or whenever they become dirty.To locate the washable pre-motor filter, remove the Easy Empty dirt tank and push the lid release button located on the carry handle. Remove the foam filter from the filter tray.

How many filters are on a Bissell?

two filters
Your machine comes with two filters. To locate the Pre-Motor filter, press the tank release button and remove the dirt tank. To access the filter, press the Filter Button found on the front of the tank and remove the foam filter from the tray.

Can you clean vacuum filters with water?

For those who’re wondering how to clean vacuum filter sponge, there are two common ways for you to do this: you can either wash them with water and soap then let them dry completely before putting them back. Or to save time, it’s also possible to use compressed air to blow out the dust inside.

What happens if you dont change vacuum filter?

A clogged up filter overworks the vacuum motor and with time this will result in motor burn out. A burned out motor will need to be replaced and this can cost a lot of money. It is not surprising that people forget or neglect to clean their vacuum filter.

What happens if I don’t clean my vacuum filter?

If the filter isn’t clean, it can impact the performance of the vacuum. Dirty vacuum filters can restrict airflow so the suction won’t be as strong.

What filter does my Bissell vacuum take?

Product Description. Bissell vacuum cleaner Style 8 / 14 Hepa filter fits all Lift-Off bag-less, Momentum, Velocity, Total Floor and Pet Hair Eraser vacuum cleaners. Genuine Bissell vacuum part. Also known as part 203-6608 or 203-7715.

Are you supposed to clean vacuum filter?

If you have dirty filters, you’ll notice a stale odor immediately when you turn on the vacuum and reduced suction as you work. For high traffic areas, the filter may need to be cleaned monthly. For most homes, vacuum filters should be cleaned at least every three months.

Do Bissell carpet cleaners have filters?

Your machine and filters should be flushed and cleaned after every use. There are two filters in your Bissell 2X Deep Cleaner that must be flushed regularly.

Where is the filter on Bissell vacuum?

More videos on YouTube

  1. First make sure your vacuum is turned OFF and unplugged.
  2. Press the tank release button on the top of the dirt tank and remove the tank.
  3. Open the tank lid by lifting the filter tab and pulling the lid up.
  4. The foam filter you see at the top of the tank is the pre-motor filter.