Are Teflon washers good for knives?

These washers are made for brass or teflon for Hinderer knives,they are very durable and smooth.

Are phosphor bronze washers self lubricating?

Mike Turber. My understanding is that the Bronze Phosphorus is continously self lubricating where the Teflon is not and the Teflon will wear down over time. The bronze remains a better bushing over time and is therefor preferred in items that will be used over very long periods of time.

What size are Balisong washers?

016″ for Balisong or other. Bronze washers for your folder. These were custom made for us for use in Balisong knives or other small folding knives.

What are phosphor bronze washers?

Phosphor bronze round flat washers are used to provide a bearing surface to minimize surface wear.

Can I wash my knives in the dishwasher?

Knives should never go in the dishwasher. Dishwasher detergent is very abrasive, and along with the banging around that happens during a wash cycle, will take the sharp edge right off your knife.

What is a Nylatron washer?

Nylatron® MDS is an extruded “moly” filled nylon 6/6, which is gray in color. The addition of particles of molybdenum disulfide enhances the surface lubricity and wear resistance over unfilled nylon. In stamped washer and spacer applications requiring high lubricity, this material may be a good candidate.

What are Kvt bearings?

Manual with KVT Ball Bearings Relies on a ring of “caged” ball bearings that surround the knife’s pivot and enable the blade to move out of the handle smoothly. KVT makes opening manual knives as smooth, easy, and often as fast as assisted opening.

How many washers does a Spyderco Tenacious have?

I figured some grit had gotten into the pivot. Once I got around to taking apart the pivot I noticed there were 4 washers, one small on the locking side and two large one small on the non locking side.

Should I lube a bearing Balisong?

For maintaining a bushing-run Balisong, the main tip aside from what’s given in the washer section is to lubricate the bushing and pivot hole as well as the usual washers as this will ensure that everything runs smoothly without wear. However, do not use too much lubricant as this could cause some gunk or slowdown.

Do bearing Balisongs need lube?

Lubricate your balisong regularly, especially if it has bearings as bearings need to run smoothly to be effective.

What is a PTFE washer?

A PTFE flat washer is a flat disc with a centrally located hole. PTFE flat washers have excellent anti –frictional properties, as well as excellent chemical and corrosion resistance. They can be used in low temperature applications.