Are round posts stronger than square posts?

Secondly, while square posts have a more stable base than round posts, the latter is more resistant to animal blows. Apart from this, square posts are susceptible to water damage and rot because of its exposed corners. But you will not experience this problem with round posts that have a more contained surface.

How long will an untreated cedar post last in the ground?

Cedar has a reputation for durability, but unless a few guidelines are followed, cedar posts can fail in as few as five years. Three factors contribute to this early failure: poor drainage, low-quality wood and poor protection against insect damage.

How deep should a hole be for a 8ft post?

about 2 feet deep
For an average fence post, about 6 to 8 feet tall, prepare to dig a post hole about 2 feet deep. To install a fence post, you’ll need a shovel or post digger, a 6-foot level, soil, and gravel or crushed stone. For gateposts, you’ll need concrete too.

Should cedar posts be set in concrete?

Set wood “on” concrete, never “in” concrete… no matter what kind of wood. Setting wood in concrete makes for a continuously moist environment in which not even the best treated wood will survive long.

Is Round Wood stronger than square wood?

Because round wood timbers are stronger than square wood, it is possible to use smaller diameter timber. It allows the builder to more efficiently and sustainably source the round wood poles. Less energy used.

How do I keep my cedar post from rotting?

Protect cedar posts with a sealant that repels water, prevents fading, and resists mildew. Simply paint the sealant on the posts with a brush. Use long, overlapping strokes in order to assure thorough coverage.

Can cedar sit on concrete?

Another way to install a cedar post on concrete is to simply buy a flat mount concrete base for your post. You will need to drill holes into the concrete.

Will cedar wood rot in the ground?

If you leave cedar wood untreated, it will not succumb to the devastating effects of mold, rot and insect damage. However, it will lose its typically golden-brown color.

What size post do you use for an 8 foot fence?

A common rule of thumb, is to dig the hole 3 times as large as the post, and to a depth of 1/3-1/2 of the post height above ground. so for a 8′ high fence, using 4×4 posts. dig the holes 12″ in diameter, to a depth of 2 1/2 – 4′. Of course, that’s assuming you’re setting the posts in concrete.