Are bicycle crank arms universal?

No, cranks are not generally always interchangeable, but you probably can transplant the crank from the broken bike. First, do both bikes have 6, 7 or 8 sprockets in the rear cluster? If so, they use the same chain width and the spacing between the chainrings will be the same.

Are all bike crank arms the same?

First, different cranksets may have a different number of arms or direct-mount interfaces (connecting the cranks to the chainrings), and they may be positioned differently. Many of Shimano’s road cranksets have four arms, but they’re not evenly distributed around the spindle.

How do I know what type of crankset I have?

Print. Shimano cranks are all identified with model information above or surrounding the area on the backside of the pedal threads. For example; FC-6700/6750 = Shimano Ultegra. The crank length is often located in the same area, which is helpful to note before placing an order.

Why is my crank arm keep coming loose?

If you’ve been repeatedly riding with a loose crank arm it could be that it’s now damaged. You could try tightening with lots of torque, grease on the square taper and threadlocker (e.g. blue Loctite, but in a pinch any kind of glue works) on the threads.

How do I know which crankset to buy?

Cranks come in a range of sizes, most commonly from 165mm to 190mm, and ideal crank length is often determined by three factors: your height, your cycling discipline and your personal preferences. If you change your crank length, it will change how it feels to pedal your bike, and it may change your fit on your bike.

How do you know what size crank arm to get?

Crank length is measured from the centre of the bottom bracket axle to the centre of the pedal axle. If you’re not sure what length the cranks on your bike are, the quickest way of finding out is typically to just look at the backside of your cranks, just below the pedal axle.

Can you Rethread a crank arm?

If you have an aluminium crank, then it is possible for the crank to be fixed by creating a new thread with a rethreading kit as described above.