Are bath mixer taps all the same size?

Size Matters Most taps in the UK are said to be a standard size, but it’s worth remembering that the size refers to the way in which the tap fits onto the pipes rather than the size of the taps themselves (basin taps being 1/2″ and bath taps having 3/4″ threads).

What is a reviver kit?

(21 products) If your taps are broken or looking tired or you just fancy a change, then installing tap reviver kits is a quick convenient way of addressing this. These replacement tap heads revive your taps without disturbing the existing plumbing.

What is the thing on the top of a tap called?

Seal, Aerator and Nozzle – This is where the mixed water exits the tap. It goes through an aerator, which is housed in a nozzle and screwed into the tap body. The nozzle is made water tight using a seal.

What size are bath tap connections?

Bath taps look very similar, except they have a 22mm thread and may be joined together as a mixer.

What tap connector do I need?

If you require a tap connector with an actual diameter of 3/4 inch you will require a 1/2 inch tap connector. The most common length of flexible tap connector is 300mm although some variations come in 150mm, 500mm and 1000mm.

Are bath tap holes a standard size?

A professional plumber would recommend that the right size hole to drill for new bath taps is around 28mm. A standard tap thread will usually be 3/4″ BSP (British Standard Pipe) which is 25mm in diameter, which is the internal measurement.

How do I know what cartridge my tap is?

How do I determine the thread size? Once you have removed the ceramic tap cartridge you will need to identify the thread size. In the UK 95% of taps are either BSP 1/2″ (Basin size) or 3/4″ (Bath size).

What is the end of a mixer tap called?

Male vs Female Aerators A female spout is where the hole is underneath your tap or inside a covering. This requires a male aerator which are readily available. If the tap hole is on the outside, it requires a female aerator. There’s 3 different sizes of tap aerator, regular, junior or tom thumb.

What size are bath tap back nut?

3/4 inch BSP brass flanged back-nut. This is the size needed for bath taps. The outside diameter of the male 3/4 inch BSP thread that this backnut fits onto measures 26.44 mm / 1.041 inch.