How old is the ResMed S9?

The ResMed S9 CPAP machine series was roughly available between the years 2010-15.

What is EPR on ResMed s9 AutoSet?

Expiratory Pressure Relief (EPR) EPR decreases the pressure at the beginning of each breath and keeps the pressure low throughout the exhalation. The pressure is reduced by an exact pressure drop of one, two or three centimeters of water pressure.

Is ResMed S9 part of recall?

No. ResMed devices are not subject to Philips’ June 2021 recall*.

Can I use ResMed S9 without humidifier?

The device will work without water in the tub but you’ll need to insert it into the device and turn humidification off in the My Options menu. If you don’t want to use the humidifier, you’ll need to insert a side cover into the device.

How does CPAP AutoSet work?

The machine uses sensors to detect room temperature to provide optimal humidification levels while minimizing condensation. The AirSense 10 AutoSet features wireless technology to keep patients engaged in their care. This technology connects to ResMed’s cloud-based management system, MyAir.

Should EPR be on or off?

So, to sum up, do not use EPR/C-Flex unless you have had a sleep study with it to make sure it’s OK. It’s not worth the risk. On ResMed machines EPR can be set to ramp only which is much less risky. Otherwise, if you think you really need it, get a study done while using it.

Should I use EPR on CPAP?

EPR, or “Expiratory Pressure Relief,” is an advanced comfort option that will reduce the pressure from your CPAP when you exhale, making it easier to breathe and helping your therapy feel as natural as possible.

Does the ResMed S9 need to be serviced?

Servicing The S9 device is intended to provide safe and reliable operation when operated in accordance with the instructions provided by ResMed. ResMed recommends that the S9 be inspected and serviced by an S9 Escape H5i Blower Mask Tube Inlet filter IP21 IP20

How do I connect my mask or humidifier to my S9?

For information on using your mask or humidifier, refer to the manual supplied with your mask or humidifier. English English 2 Setup Refer to illustration A. 1. Connect the DC plug of the power supply unit to the rear of the S9. 2. Connect the power cord to the power supply unit.

What is an S9 auto set used for?

English 1 S9 AutoSet indications for use The S9 AutoSet self-adjusting system is indicated for the treatment of obstructive sleep apnoea (OSA) in patients weighing more than 30 kg. The S9 AutoSet self-adjusting system is intended for home and hospital use.

Is the S9 escape registered in the US?

S9, S9 Escape, SlimLine and ClimateLine are trademarks of ResMed Ltd. S9, Escape, SlimLine and ClimateLine are registered in U.S. Patient and Trademark Office. © 2012 ResMed Ltd. 368874/1 2012-10 A B C 3 1 2 4 5 1 2 3 4 5 6 368874 Cover.indd 1 2/10/2012 3:03:52 PM English 1 S9 Escape indications for use