Can you put washer and dryer in cabinet?

You must allow at least 16 inches of space between the top of the washer and a shelf or cabinet. While the washer and dryer can touch each other and the walls on each side of the appliances, leaving at least 1 inch of space between the sides and the appliances allows you to move the appliances if necessary.

How deep should a washer and dryer cabinet be?

Upper kitchen cabinets are roughly 12″ deep, which allows enough space for detergents, cleaning supplies, etc. Lower kitchen cabinets are typically 24″ deep. From a design standpoint, this works well next to a washer or dryer as both are usually 25″-28″ deep.

How high should a cabinet be above a washer and dryer?

The bottom edge of an ideally-positioned cabinet would begin 24 inches from the top of a 33-inch tall, side-by-side washer/dryer pair.

How do you support a countertop over a washer and dryer?

Use L-brackets along the top of the gable with one side screwed into the underside of the countertop (along the middle horizontal piece) and the other into the gable. Once the countertop has been attached to the cleat and gable, slide the washer and dryer back in place.

How much space do you need between washer dryer and countertop?

You’ll want to measure the back of the wall, the sides, and the height of the washer and dryer set. Account for 1″ to 3″ for the spacing between the washer and dryer and counter.

How much space is needed behind a washer and dryer?

about 6 inches
You want to be sure the doors will clear any walls or door jambs. Behind: Add in about 6 inches for venting space and hoses. On the sides: Help minimize noise by leaving about 1 inch of space on each side of your washer and dryer.

How much space do you need around a washer and dryer?

While measuring, make sure to allow for at least six inches of space between the back wall and the appliance for hoses and ventilation, as well as one inch of clearance between the washer and dryer for side-by-side units.