What is LM337 generally used for?

The LM337 is the basically equivalent counterpart of the LM317 positive voltage regulator. This IC is commonly used in adjustable lab voltage generators in combination with the LM317 IC. It can be also used in the current regulator.

What is the difference between LM317 and LM337?

LM317 is a positive voltage regulator and LM337 is the negative compliment voltage regulator IC of LM317. The LM317 IC is a 3-terminal voltage regulator that is designed to supply in excess of 1.5 Amps of a DC output voltage range of (1.2-30) Volts.

What are specifications of LM317 and LM337?

The LM237 and LM337 are adjustable 3-terminal negative-voltage regulators capable of supplying in excess of –1.5 A over an output voltage range of –1.2 V to –37 V. They require only two external resistors to set the output voltage and one output capacitor for frequency compensation.

Which is the 3-terminal negative voltage regulator IC * 2 points?

IC 79xx
IC 79xx is a three-pin negative voltage controller IC. It is a small integrated circuit used in a circuit to supply a constant negative input voltage.

Which type of regulator is considered more efficient?

Which type of regulator is considered more efficient? Explanation: The switching element dissipates negligible power in either on or off state. Therefore, the switching regulator is more efficient than the linear regulators.

What is negative voltage regulator?

Negative voltage regulators are mainly used in Op-Amp and other circuits where a negative supply voltage is needed. In many cases where an Op-Amp is working in dual mode power supply a negative voltage will be regulated by these 79XX ICs.

Can LM317 boost voltage?

Introduction: LM317 Current Boosting Secrets! The output voltage of the regulator can be adjusted from 1.25V to 35V. However, the chip can deliver currents up to 1.5A which is not enough for some power applications.

How do you use a 3 pin voltage regulator?

For example, with a 9-volt battery, you’d connect the positive end to pin 1 and the negative (or ground) end to pin 2. A 7805 would then give you +5 volts on pin 3. Voltage regulators are simple and useful. There are only two important drawbacks to them: First, the input voltage must be higher than the output voltage.

What is 3 pin voltage regulator?

LM317 voltage regulator IC has 3 pins. The first pin is used for adjusting the output voltage, second pin is used for collecting the output and third pin is used for connecting the input. The adjustable pin (terminal) is provided with a variable resistor which lets the output to vary between a wide range.

How do I choose a voltage regulator?

Summary. To select a voltage regulator for your system, start by assuming a linear regulator can be used if the input voltage is higher than the output. Only if that wastes too much power, then use a buck switching regulator. If you need an output voltage higher than the input, then use a boost switching regulator.