How long does Messmers take to dry?

24-48 hours
We wouldn’t recommend it. UV Plus needs at least 24-48 hours to dry in good conditions. If a newly stained deck is rained on, the rain can force the stain up out of the pores of the wood, leaving a blotchy appearance. It’s best to wait until there is no precipitation expected for 48 hours.

Is Messmers oil based?

Messmers Wood Exterior Finish Penetrating oil-based finish, protects, conditions, and enhances the natural beauty of Siding, Decks, Fencing and Outdoor Furniture.

What is the shelf life of Penofin?

How long will Penofin last? On average, you can expect Penofin to perform for 9-24 months on horizontal surfaces and 2-5 years on vertical surfaces.

How long before you can walk on stained deck?

In most cases a full body stain or aryllic deck finish will be dry to touch within an hour in dry, hot weather. After two hours you could take a chance and walk on it with shoes, though I’d recommend barefoot. After about 4 hours you should be able to safely walk on your deck.

How long should stain cure?

On average, stains take around 24 to 48 hours to dry. Some brands or stain types may take longer or up to 72 hours. Many factors go into the drying time. Double-check the instructions on the label for the exact dry time.

How do I use Messmers UV Plus?

Apply UV Plus when surface temperatures are between 45F and 90F. If surface is hot to the touch, it is too hot to apply product. Do not apply product if precipitation is expected within 24-48 hours. Spray Application: When spraying, back brush or roll to prevent sags and runs.

What is clear UV stain?

Defy UV-Resistant Clear Wood Finish is a clear deck stain designed with a clear UV inhibitor to prevent graying and protect the natural appearance of your wood. Now you can protect your wood from the damaging effects of the sun and moisture without altering the color of your wood.

How do you use Messmers brightener?

Mix Wood and Deck Brightener in warm water according to label directions. Apply to the wet wood previously cleaned by Wood and Deck Cleaner. Allow the Brightener to sit on the surface for 10 minutes, keeping the deck wet with more product if necessary. Rinse thoroughly with clean water.

Why does Penofin turn black?

If you put your hand on the wood and it is uncomfortably hot, it is too hot to apply Penofin. The product may flash (like oil in a hot pan) and dry on the surface. This will eventually cause darkening, and the coat will chip and peel. If your nose is cold, it is too cold to apply Penofin.

Is Penofin a good wood sealer?

Penofin® Stain & Sealer offers an easy to use, quality solution to protect and enhance the beauty of wood. Penofin® Stain & Sealer is a penetrating, oil based, semi-transparent wood stain and sealer in one. It has been formulated for both ease of application and to protect and enhance the natural beauty of wood.

What is the best temperature to stain a deck?

Avoid the Cold If you’re staining your deck in the spring or fall, wait for a day with highs above 50 degrees Fahrenheit. Also, make sure freezing temperatures aren’t in the forecast for that night. If it drops below 32 degrees Fahrenheit before the stain has thoroughly dried, it can hinder the curing process.