How do I connect my Canon MG5220 to my computer?

Windows

  1. Press the ON button (A) to TURN OFF THE MACHINE.
  2. Turn on the computer, then insert the Setup CD-ROM into the CD-ROM drive.
  3. Windows 7/Windows Vista.
  4. Click Easy Install.
  5. Click Install.
  6. Select Use the printer via USB, then click Next.
  7. Click Exit to complete the installation.

What model is a canon MG5220?

The PIXMA MG5220 is an advanced wireless inkjet photo all-in-one with a stylish, compact design delivering a fantastic combination of performance and convenience.

How do I connect my Canon MG5220 to WIFI?

Wireless Setup Using WPS® (Wi-Fi Protected Setup)

  1. Use the or.
  2. Use the or.
  3. Select Yes, then press the OK button.
  4. Select Other setup, then press the OK button.
  5. Select WPS, then press the OK button.
  6. Select Push button method, then press the OK button.
  7. Press the OK button.

How do I connect my Canon mg3100 printer to WIFI?

Step 1

  1. Press and hold the [Maintenance] button (A) on the printer for approximately 5 seconds.
  2. Press the [Fit to Page] button (A).
  3. Make sure that the LED flashes as shown in the illustration above, then press the [WPS] button on your access point within 2 minutes.

How do I connect my Canon mg5520 to my laptop?

Connect your computer or tablet to your printer with a USB cable. Once USB connection is complete, printer driver is automatically detected. Once printer driver is detected, Canon Inkjet Print Utility, software for making detailed print settings, is downloaded automatically.

How do I setup my Pixma printer?

WPS Connection Method

  1. Make sure that the printer is turned on. Press & hold the [Wi-Fi] button on the top of the printer until the alarm lamp flashes once.
  2. Make sure that the lamp next to this button starts to flash blue and then go to your access point and press the [WPS] button within 2 minutes.

How do I scan on a Canon mg5220?

Open the top of the scanner and place the document you wish to scan on the glass. Set preferences on the screen as needed. Select the “Scan” button when ready. The Pixma 5220 should start the scanning process.

How do I fix my Canon printer not responding?

Fixes to try

  1. Do some basic troubleshooting.
  2. Run the printer troubleshooter.
  3. Restart the Print Spooler service.
  4. Configure the correct printer port for your printer.
  5. Update your printer driver.

How do I connect my Canon mg5520 to my computer?

How do I connect my Canon mg5500 to my computer?

Wireless Connection

  1. Make sure that the printer is turned on.
  2. Press the HOME button (B) on the printer.
  3. Use the or.
  4. Press the left Function button (D).
  5. Select Wireless LAN setup, then press the OK button.
  6. The printer will automatically search for compatible access points.

https://www.youtube.com/watch?v=dmQ_i38lKHQ