How do I install HP laserjet 1010 driver?

Select “Control Panel.” Click on “Devices and Printers.” Click on “Add a Printer.” This is found on the upper-left corner of the window. Choose “Add a Local Printer.” Click on “Next” to proceed. Select “Use an existing port.” A drop-down list will show; select “DOT4_001” from the options.

How do I get a DOT4 port in Windows 10?

Configure the installed driver by changing the port from parallel to a DOT4 port.

  1. In the Devices and Printers window, right-click the name of the printer and then click Printer Properties.
  2. Click the Ports tab.
  3. Click the drop down menu, and then change the port from LPT1 to USB or DOT4.
  4. Click OK.

How do you fix an unsupported personality Pclxl?

Go to Setup > Printing > Printer Setup > F8 tab. Select the problem printer from the drop list. Select Alternate Print Method (GDI). Click Update to save the print method selection.

How do I reset my HP LaserJet 1010 printer?

For the 1010 you can reset your model like so: Turn the printer off. Press and hold down the green GO button. Turn the print on while continuing to hold down the green GO button for at least 5 seconds, but no longer than 15 seconds.

How do I clean my HP LaserJet 1010 printer?

Print a cleaning page.

  1. Access the product Properties dialog box. Windows XP: Click Start, click Printer and Faxes, right-click HP LaserJet 10xx series, and then select Properties.
  2. Click the Configure tab.
  3. In the Cleaning Page section, click Start.
  4. Click OK to begin the cleaning.

How do I install an HP printer driver?

In Windows, search for and open Add a printer or scanner . Click Add a printer or scanner, and then wait for Windows to locate available printers. If your printer is found, click it, and then click Add device to complete the driver installation.