What years did Chevy use Dana 60?

The Dana 60 axle has much larger components than the Model 44 or GM 10 bolt front axles used on previous GM 4x4s. The Model 60 as used by GM from 1977 to 1991 has very durable greaseable king pins and disc brakes.

What Chevy trucks came with a Dana 60?

1964–1977 Chevrolet and GMC 3/4-ton pickups.

  • 1975–1987 Chevrolet and GMC 1-ton pickups and Suburbans.
  • 1979–2012 Chevrolet and GMC 1-ton vans.
  • 2002–2005 Chevrolet and GMC 1/2 + 3/4 Ton pickups and Suburbans with Quadrasteer.

    • What’s the difference between a C10 and C20?

    Chevy C10 and C20 Differences. The obvious difference between the C10 and the C20 is that one is a half-ton and the other a three-quarter-ton truck. These classifications don’t refer to their respective curb weights, but rather to their payload capacity.

    Is a Dana 60 a 10 bolt?

    There are rear axle and four wheel drive front steering versions of the Dana 60. It can be readily identified by its straight axle tubes, 10 bolt asymmetrical cover, and a “60” cast in to the housing. Gross axle weight ratings are often lowered by the vehicle manufacturer for safety and tire reasons.

    What trucks have Dana 60 axles?

    The Dana 60, a heavier-duty axle than the Dana 44, was first used in the 1950s. It was the axle of choice under countless Dodge, Ford, GM, Studebaker, IH and Jeep 3/4-ton and 1-ton fullsize trucks, as well as Ramchargers and Trail Dusters with the 440ci V-8, and some heavy-duty 1/2-ton Ford and IH trucks.

    Is a GM 14-bolt a Dana 60?

    The Dana 60 ring gear is 9.75″ in diameter, and semi-float 14 bolt axles have a 9.5″ ring gear. Because they have larger ring gears, the pinion on 14-bolt full float axles and Dana 70s is less likely to be damaged than the pinion on a Dana 60 or 14-bolt semi-float.

    What did Dana 60 rear come in?

    How do I identify my Dana 60 rear axle?

    It can be identified by its 10-bolt rear cover, which appears to be lying on its side. Each Dana 60 has a build date and bill of materials numbers stamped into the back of the passenger-side axle tube. These numbers are fairly small but they are always on original axles.

    How do I identify my Dana 60 axles?

    How much does a 1967 Chevy C20 weight?

    Model Wheelbase GVW
    C10/K10 127 in 4,400-5,000 / 5,600 lbs
    P10 102 in 4,600 – 5,400 lbs
    C20/K20 127 in 5,500-7,500 / 5,700-7,600 lbs
    P20 104 / 125 / 137 in 7,000 lbs