What does load tray 1 plain letter mean?

Determine the Full Error Message An example message would be 024-965 Load Tray 1 Letter Plain. This indicates that the print job sent has requested Letter sized Plain paper from Tray 1. If tray 1 is empty, loaded with A4 sized Plain paper, or Letter sized Thick paper this error will occur.

How do I change the tray on my Lexmark printer?

Setting the paper size and type

  1. From the control panel, navigate to: Settings > Paper > Tray Configuration > Paper Size/Type > select a paper source. For non-touch-screen printer models, press to navigate through the settings.
  2. Set the paper size and type.

How do I change the default paper tray?

From the printer properties, change to the Paper tab and select Auto Selection from Paper Source option. Besides, in the MS Word’s Menu bar, click Tools > Option. Then choose the Printer tab. On the default paper tray option, choose Use Default Printer Setting.

How do I disable HP load tray 1?

For most HP printers, simply go into the Configure Device Menu, choose the Printing Menu, then scroll through and find where it says Manual Feed and select Off. If the printer asks you to load tray 1 with a specific size and type, it is not finding what it’s seeking in any other trays.

How do I manually feed my Lexmark printer?

Loading the manual feeder

  1. Unpack the printer and remove all packaging material.
  2. Remove the internal packaging.
  3. Open Tray 1, and adjust the paper guides.
  4. Extend the rear paper guides.
  5. Flex the sheets back and forth to loosen them.
  6. Load the paper.
  7. For a local installation, connect the USB cable.

What is MP feeder on printer?

The Load MP Feeder message indicates that the printer wants you to load paper. The letter suggests 8½ x 11″ usual US size. You could either re-send the file calling for Plain Letter or put some plain paper in the MP tray and program it for custom type 6. Follow this answer to receive notifications.

How do I get my printer to print from tray 1?

NOTE: The steps may differ depending on your application.

  1. From within your application, click File => Print.
  2. Click Properties.
  3. Click on the Basic tab.
  4. In the Paper Source dropdown choose the Tray that you want to print from.
  5. Click Apply => OK.
  6. Click OK or PRINT, depending on your application.