What are the parts of a metal lathe?
What are the parts of a metal lathe?
While there are different types of lathes, most feature a few basic parts to facilitate their operations.
- Bed. The bed is a large horizontal structure or beam that’s used to support other parts of a lathe like the headstock and tailstock.
- Headstock.
- Tailstock.
- Carriage.
- Legs.
- Cross Slide.
- Saddle.
- Apron.
What are the four 4 major parts of the metal lathe?
What are the Main Components of a Lathe?
- Headstock: The headstock is usually located on the left side of the lathe and is equipped with gears, spindles, chucks, gear speed control levers, and feed controllers.
- Tailstock:
- Bed:
- Carriage:
- Lead Screw.
- Feed Rod.
- Chip Pan.
- Hand Wheel.
What are the three main parts of the lathe?
1. Headstock
- (i) Chuck. It is that part of the lathe machine which is used to hold the workpiece.
- (ii) Main Spindle. This part of the lathe machine is used to hold cylindrical work piece within it.
- (iii) Feed Selector.
- Guideways.
What are the parts and functions of a lathe machine?
There are six major parts of a lathe machine. These are the bed, the headstock assembly, the main spindle, the tailstock, the carriage, and overload safety devices.
What is the cutting part of a lathe called?
Also known as the headstock, its main task is to pass the rotational motion from the main motor through a series of speed change mechanisms, so that the spindle can obtain the required forward and reverse rotation speeds, and at the same time, the spindle box separates parts.
What are the two main lathe accessories?
The following are the different lathe accessories:
- Centres.
- Chuck.
- Catch plate or carriage.
- Face plate.
- Angle plate.
- Mandrel.
- Rests.
Which part of the lathe machine is called dead Centre?
Tail stock. Generally, it is situated on the right side of the Lathe machine. It supports the one end of the workpiece when it is too long. As it does not carry any moving parts, it is called the dead center.
What is the apron on a lathe?
The apron is the front face of the carriage. It is where the feed controls are located on most manual lathes. The apron is also a housing for the gears and associated mechanisms related to power feeding of the carriage and cross slide.
What is the spindle on a lathe?
On a lathe (whether wood lathe or metal lathe), the spindle is the heart of the headstock. In rotating-cutter woodworking machinery, the spindle is the part on which shaped milling cutters are mounted for cutting features (such as rebates, beads, and curves) into mouldings and similar millwork.
What are the tools used in lathes called?
Knurling tools are used to produce knurled lathe parts, through creating or pressing a pattern onto a round section, used as a grip for a handle, also usually created on fasteners like nuts.
What is the name of the lathe accessory?
The lathe Accessories are Face Plate, Catch plate or Dog plate, Mandrel, Steady rest, Follower rest, Chuck, etc.
