How long should a Dyson DC39 last?

Sounds like most Dyson vacuums are designed to last 3 years BANG, SMOKE and its gone.

What is a Dyson DC39?

The Dyson DC39 is a canister-type vacuum that boasts the most powerful cyclone technology of its kind, according to Dyson. It has many special features, including lightweight design, easy-turn technology, and a triggerhead cleaning nozzle adjustable with minimal bending.

When did the Dyson DC39 come out?

2012
DC39 Multi floor and DC39 Animal will be available at www.dyson.com and most major retailers from mid-March, 2012, and costs $449.99 and $499.99 respectively.

Does Dyson DC39 have a HEPA filter?

The DC39 Animal has a permanent HEPA filter, to eliminate small particles and allergens. It’s also equipped with a pre-motor filter (water washable).

How do you clean a Dyson dc39 vacuum?

Remove the clear bin from the barrel. Place the bin inside a bag, close the bag around the bin and press the button to release the dust and debris. Shake or tap firmly to remove all dust and debris from inside the bin and fine dust collector. Check the fine dust collector for blockages and remove as necessary.

How do I empty my Dyson dc39?

Emptying the bin

  1. Emptying the bin. Remove the bin by pressing the release button to the side of the carry handle.
  2. To release the dirt, press the red bin release button.
  3. Close the clear bin base so it clicks into place and is secure.
  4. Replace the clear bin and cyclone back into position on the front of the Main body.

Why is my Dyson dc39 losing suction?

Blockage in Canister or Pre-Filter After continued use, the canister and pre-filter will become clogged. To fix this problem, empty the canister and clean the pre-filter. If the problem persists, a replacement pre-filter may be required.

How heavy is a Dyson dc39?

22.9 lb.
Weight: 22.9 lb. Width: 19.5 in.

How do you clean a Dyson HEPA filter?

Easy step-by-step guide on how to clean your vacuum filter

  1. Remove your Dyson filter(s) Remove your filter(s) from your Dyson machine.
  2. Remove excess dust. Tap your filter(s) lightly on the side of the sink or in the bin, to remove any loose dust and debris.
  3. Rinse filter(s)
  4. Give it a firm shake.
  5. Leave to dry for 24+ hours.

How do I clean the filter on my Dyson dc39?

Wash the filters Run cold water through the open end of the filter for approximately 10 seconds. Turn the filter up side down and tap 10 times. Squeeze and twist the filter. Repeat until clean.