Can you use a headset with Yealink phone?
Can you use a headset with Yealink phone?
Many newer Yealink telephones have a headset port and button for easy headset use. You simply plug your H-series headset into the U10P-S cable, and into your Yealink telephones headset port. To answer or end a call, you simply press the headset button.
What headsets are compatible with Yealink phones?
Wireless headsets
| Manufacturer | Model |
|---|---|
| Yealink | WH66/WH67 |
| Plantronics | Savi 700 Series (710, 720, 730, 740, 745) CS500 Series (510, 520, 530, 540) C054 |
| Plantronics | CS520 CS540 Savi 8220 not applicable to T58A/V |
| Jabra | PRO 9450 PRO 9460 PRO 9465 PRO 9470 PRO 920 PRO 925 Engage 65 Mono Engage 65 Convertible Motion Office GN 9125 |
What wireless headset is compatible with Yealink T46S?
RJ9 Phone Headset with Noise Cancelling Microphone, Callez Office Phone Headset Mono Compatible with Yealink T46S T42S T48S T41S T27G T20P T21P Avaya 1608 9608 Grandstream GXP2170 2135 Panasonic Cisco.
Why is my Yealink headset not working?
Headset not working Make sure the headset model is compatible with your device. Visit the Yealink support site for more information. Check that the headset cord is fully connected to the headset jack on the phone. Check that the headset mode is activated.
How do I connect my Plantronics headset to my Yealink phone?
To pair and connect your Bluetooth headset to your phone:
- Press Menu->Basic->Bluetooth.
- Press the Scan soft key to search the Bluetooth devices. The LCD screen prompts the following message:
- Select the desired Bluetooth headset and press Connect soft key.
- Enter the PIN in the Password field.
- Press the OK soft key.
How do I pair my Plantronics headset with Yealink?
How to configure Yealink EHS36 with Plantronics Wireless Headsets
- 1) Connect the RJ12 Cord to the Yealink EHS36 Adapter.
- 2) Connect the 3.5mm DC Jack to the other side of the Yealink EHS36 Adapter.
- 3) Connect the Plantronics Base to the AC Adapter.
How do I connect my Yealink phone to my computer?
Connect the Ethernet cable to the Ethernet jack on the phone. Connect the other end of the Ethernet cable to the Internal Computer Network.
How do I unmute my Yealink phone?
Press the Mute key during a call (The mute key LED glows red). 2. Press the Mute key again to unmute the call (The mute key LED goes out). Tip: You can also mute the microphone while the phone is dialing or ringing so that the other party cannot hear you when the call is set up.
How do I connect a USB headset to Yealink phone?
Connect the headset to the 3.5mm jack of the controller. To use the headset mode, simply insert the USB connector into the USB port of a compatible phone or PC. Connect the headset to the 3.5mm jack of the mobile phone or PC. To adjust the headband, lengthen or shorten the adjustment rod until it fits comfortably.
Will any Bluetooth dongle work with Yealink?
To connect a Yealink phone to Bluetooth, you can use a USB Dongle BT41, Yealink Bluetooth adapter, or a Yealink wireless headset adapter.
