What does ng mean on a fax transmission?
What does ng mean on a fax transmission?
Poor Line Condition
“Poor Line Condition” or “NG” are messages that may appear on the Transmission Verification (TVR) report if a fax transmission fails. There are several reasons why a fax transmission may fail, but these two errors are typically related to interference, static, or noise on your phone line. 1. Check for a dial tone.
What does ng mean on printer?
RESULT
| OK: | Printing was completed successfully. |
|---|---|
| NG: | Printing failed. The error code is also printed next to “NG.” |
What does poor line condition out of memory mean?
‘ – If yes, refer to: ”Poor Line Condition’ or ‘NG’ message on Transmission Verification Report’ – If no, proceed. The ‘Out of Memory’ message means your Brother machine’s memory is full. The amount of memory used depends on the amount or type of data on the documents being faxed, copied, or printed from the PC.
What causes fax transmission errors?
This situation can be caused by: Line quality issues, fax device issues, and the sharing of a phone line with other devices such as credit card processing terminals. Temporary conditions such as severe weather conditions in the destination area can also cause transmission failures.
What does ng mean on a scanner?
The messages ‘NG’ and ‘Poor Line Condition’ are generally caused by interference on the telephone line, an incorrect phone line connection, or an alarm system or other device on the line. To resolve this issue, follow these steps: 1.
Why is my fax slow?
The more data that needs to be transmitted, the longer the time to send the fax. Quality – A poor connection or noise on the telephone line will slow down a fax transmission. In some cases, the transmission can be cut off partway through sending the fax, and the fax must be re-tried.
What is Ng error in Canon printer?
“OK” indicates that the transmission was completed successfully while “NG” and three digits (an error code) indicates that the transmission failed. For e-mail, Communication Management Reports indicate the transmission result between the machine and the mail server, not between the machine and the destination address.
How do I clear the memory on my Brother scanner?
Resetting the Brother to Factory Default
- Press the “Menu” key.
- Type in the model code for your Brother copier: Press “4” then “4” for MCF models Press “3” then “4” for DCP-8085DN Press “3” then “3” for DCP-8080DN.
- Press the up arrow key until “Reset” on the menu is highlighted.
- Press the “Stop/Exit” key.
How do I clear the memory on my fax machine?
Delete faxes from memory
- From the Home screen, touch the Setup button.
- Touch the Service menu.
- Touch the Fax Service menu.
- Touch the Clear Saved Faxes button.
Why is my fax not sending?
If you find your fax not working, it could be due to the following reasons: The fax number you’re trying to send your fax to is busy or unreachable. You are trying to send a fax to a number that is blocked or outside your area code. Your fax machine could not establish a connection with your telephone line or modem.
How long can a fax take to send?
When sending or receiving a fax, documents that contain mostly text usually take approximately 1 minute per page. For documents that contain graphics (e.g. scans of documents), or for faxes that are being sent through a slow phone line, it may take 5 minutes per page or more to be sent or delivered.
