What is a Cleveloc nut?

A Cleveloc Nut is a self-locking nut with quality re-usability characteristics and superior locking. It holds a geometrically developed elliptical collar to provide flexible locking. This elliptical form ensures a high fatigue life and consistent performance, as well as dependability in service.

How does a Philidas nut work?

A Philidas nut is a locknut with one or more slots cut laterally in the reduced-diameter circular top for less than half the diameter, the metal above the slot(s) being deformed downwards so that over the last one or two turns, the thread for half the diameter is “axially depitched” or displaced from its normal …

What is a self locking nut?

A Locknut (self-locking nut, locking nut), is a nut which resists loosening through vibration and normal use. This trait makes them essential hardware for a multitutde of applications. Unlike free spinning nuts, lock nuts make use of a deforming elastic or metal material to stay in position against torque and shock.

Are lock nuts reusable?

They are able to be reused, but only if the prevailing torque meets certain specifications. Lock Nuts with a Nylon Insert are perhaps the most reliable lock nut, as it is only limited by the temperature of the application it has been used in.

What is AJ nut?

J-Nuts | AdvanceBasics J-Type Nuts or J-Nuts are self-retaining fasteners that provide a simple and rapid attachment of mating panels. J-Type Nuts snap over the edges of panels or into center-hole locations. They hold themselves in place for blind assembly, and they “float” freely for easy hole alignment.

How do you use a Stover nut?

Theoretically, the nut’s distorted thread’s elastic nature can allow the nut to be reused infinitely. In practice, the nut loses its elasticity slightly with each use. It can be reused multiple times, but it’s generally recommended to use new Stover nuts after several re-fastenings of the nut and in critical locations.

How many times can you use a self locking nut?

“Do not reuse self-locking nuts. These nuts are designed to be used only once and should be replaced whenever they are removed.” Recently, I bought a book of Mr. Carroll Smith: “Nuts, Bolts, Fasteners and Plumbing”, ISBN-13: 978-0-87938-406-7.