Who makes Vactor trucks?

Who makes Vactor trucks?

The Pullman Company is acquired by Forstmann, Little & Co., then becomes a unit of Federal Signal Corporation and is renamed Vactor Manufacturing.

What does a Vactor do?

A vactor (or Super Sucker) is used to suction wet and dry materials. It gets its name from the manufacturer Vactor, which created the first vactor with water jetting and vacuum features. This type of truck pneumatically loads materials with a suction line (pump).

How heavy is a Vactor truck?

Vactor 2112 HXX PD Hydrovac w/ Sludge Pump

How much water does a Vactor truck hold?

Water tank capacity up to 1,500 gallons. Pump delivery system up to 120 gpm.

How far can a Vactor truck reach?

Vacmasters says the System 4000 can operate up to 200 feet away from the truck to reach difficult areas. The popularity of vacuum excavation is sure to grow as the awareness of the technology expands.

Who owns Vactor Manufacturing?

Federal Signal Corporation
Vactor’s parent company, Federal Signal Corporation, is expecting to invest up to $25 million over the course of the expansion project, which will increase efficiency and capacity to supply the growing demand for Vactor’s newly redesigned 2100i combination sewer cleaner and the TRUVAC® branded series of hydroexcavators …

What is a Vactor vehicle?

Vactor means a truck mounted with a mechanical high suction vacuum, pressure washer, and tanks to hold water and waste water typically used for drainage and sewer cleaning.

How big is a Vactor truck?

Commercial vacuum trucks which collect fecal sludge usually have a volume of 10–55 cubic metres (350–1,940 cu ft). However various smaller versions for specialized applications or low-resource settings can be found with tanks as small as 500 litres (110 imp gal; 130 US gal).

How many yards can a vac truck hold?

Primarily, when it comes to F3 and F4, it is water capacity and debris capacity. So, the Tornado F3 will hold 1250 gallons of water and 10 yards of debris. The Tornado F4 will hold 1550 gallons of water and 12 yards of debris. The Tornado F5 will hold the same 12 yards of debris but 1950 gallons of water.

How deep can a hydrovac go?

around 60 feet
Hydrovac machines can dig down to the depth of around 20-30 feet, but the most powerful trucks can go down to around 60 feet, making precision digging possible in areas where no other method can achieve the desired results.

How powerful is a vacuum truck?

The Industrial Loader generally has a large positive displacement blower capable of generating over 6000 CFM. With vacuum capabilities of as much as 29 inches of negative pressure. These positive displacement blowers are capable of pulling material long distances as much as 700 feet or more.

What are vac trucks?

You’ve probably seen large industrial trucks with holding tanks, pumps, and suction hoses on the road or in and around construction sites, they’re called vacuum trucks. Not only do they provide a vital service they are changing the face of excavation in Australia due to their non-destructive approach.