How do I fix error code 5d?
How do I fix error code 5d?
If the 5d/Sd error code persists, a small reduction of the recommended amount of detergent may resolve the issue. Attention should also be paid to the concentration of the detergent, with the amount adjusted accordingly. Also, be aware that high-efficiency washers require less detergent than standard washing machines.
Why does my Kenmore washer say 5d?
The 5d (or Sd) error code indicate that the control detected a suds lock or overdose of detergent during the drain or spin phases of the cycle. This is usually caused by overuse of detergent. It can also be caused by using regular detergent instead of HE (High Efficiency) detergent.
How do you clear a d5 code?
To fix this error in the most simple way, Close the door tight and restart the wash cycle. If the error dS reappears after restarting the wash cycle, try unplugging the washer for 5 minutes to clear the error code.
What does a code SD mean on a Kenmore washer?
The SD error code indicates suds have been detected in the washer. Make sure you’re using HE low sudsing detergent. If it is a 2X or 3X concentrate make sure that you’re not using to much. This can indicate to much soap or the wrong kind of soap was used in the washer.
How do I fix error code 5d on Kenmore?
Straighten out the kink, replace the hose, and screw the top of the washer back on. This should clear the 5d error. You might want to run an empty test cycle to make sure the machine is now in working order.
What does F21 mean on a Kenmore washing machine?
a Long Drain error
@gwenr Error F21 is a Long Drain error. If the drain time exceeds 8 minutes this error code will be displayed. In addition, a “SUDS” error may also be displayed. This may be an indication of a drain pump problem and/or clog in the drain line. Unplug your machine for 1/2 hour to see if the CCU will reset.
How do I fix error code 5D on Samsung washing machine?
If a 5D error occurs, you need to wait until the foam level drops. If it appears regularly, change the detergent. Check for blockages in the drain system. If there is no foam, check the foaming sensor and the control module.
What does D5 mean on a Maytag washer?
BLOCKED COIN 1
Model: ALL
| Fault Code | Fault | |
|---|---|---|
| d13 | d16 | CONTROL NOT RECEIVING COMMUNICATIONS FRON DEBIT CARD READER |
| d4 | WASHER LID SENCE ERROR ON CONTROL BOARD | |
| d5 | BLOCKED COIN 1 | |
| d7 | LAST FILL WAS SLOW |
What does 5d mean on a washer?
The 5d or excess suds error code usually indicates that there’s a problem with the detergent you’re using. And while it may not stop your washing machine from working, you still have to eliminate it to get the most out of your appliance.
What does 5d mean on a washing machine?
