How do I pair my Jabra 9450 headset?

Prerequisites

  1. Dock the charged headset in the base.
  2. Center-press the Microphone volume switch on the base to enter setup mode. The mute indicator will blink slowly to indicate setup mode.
  3. Simultaneously press and hold (5 seconds) the Desk phone button and the Softphone button. After resetting, the base will restart.

How do I reset my Jabra PRO 9450 headset?

Press and hold until the mute button on base starts flashing. While the mute button on the headset base is flashing, simultaneously press and hold the Desk phone button and the Softphone button for 5 seconds to reset the configuration.

How do I connect my Jabra 9450 to my computer?

Plug the supplied USb cable into the port marked on the base. 2. Connect the USb cable to any free USb port on the PC. This type of desk phone has a dedicated headset port (usually at the back of the phone).

How do I increase the volume on my Jabra PRO 9450?

Adjusting the Listening Volume on the Jabra PRO 9450 Wireless…

  1. Brushing in a backward motion (towards ear) will increase the listening volume.
  2. Brushing forward (towards your mouth/end of microphone) will decrease the listening volume.

How do I connect my Jabra PRO to my phone?

Prerequisites

  1. Turn on the Bluetooth setting on your mobile device.
  2. Turn off your headset.
  3. To enter pairing mode, press and hold the Answer/end button on your headset until the light turns blue.
  4. To pair, go to the Bluetooth menu on your mobile device and select the Jabra headset from the list of available devices.

How do I get my Jabra PRO headset to work?

Connect the Jabra Link 14201-30 EHS cable with the red band to the AUX interface on the headset base….Configuration:

  1. Ensure the USB headset function on the desk phone is enabled. Refer to your phone or IT support for assistance.
  2. Follow the setup instructions for your Jabra wireless headset.
  3. Make a call to the headset.

Why is my Jabra headset not working?

On your mobile device, turn Bluetooth off and on. Try to pair your Jabra device using a different mobile device. This is to confirm that a different mobile device will find and pair with your Jabra device. Ensure your Jabra device is updated with the latest firmware version.

How do I pair my Jabra PRO headset?

To enter pairing mode, press and hold (5 seconds) the Multi-function button until pairing instructions are announced. To pair, go to the Bluetooth menu on your mobile device and select the Jabra Pro 925/935 from the list of available devices. Enter “0000” (four zeros) if you are asked for a pin code.

How do I get my Jabra headset to work on my laptop?

Use the following steps to connect your Jabra device with your computer.

  1. Plug the Jabra Link into a USB port on your computer.
  2. Turn on your Jabra headset.
  3. Go to the sound settings for your computer, and select the Jabra Link as the output and input device.
  4. Your headset is now ready to use.

Why won’t my Jabra headphones connect to my computer?

Check that the Bluetooth connection is active on the computer. Remove the previous pairing and re-pair. Reset your Jabra Bluetooth device. Ensure that you have the latest version of the softphone client installed.

Why is Jabra not loud?

Headphones are not turned up Most Jabra headphones will have a volume dial on them. It doesn’t matter how high your audio device is cranked up. If the volume dial is turned all the way down, then the headphones will be quiet. So, switch that dial up.

Why is my Jabra headset volume so low?

The received/transmitted audio may be low because the headset cable is connected to the wrong port on the phone. Connection to the wrong port may cause low audio or even permanent damage to the headset. Make sure the Jabra flat cord with modular connector is inserted into the headset port on the desk phone.