How much is a raptor bedliner?
How much is a raptor bedliner?
Compare with similar items
| This item U-Pol Products RAPTOR Black 1.7 Voc Truck Bed Liner Kit – 4 Liter | U-POL Raptor Black Urethane Spray-On Truck Bed Liner & Texture Coating, 2 Liters | |
|---|---|---|
| Price | $19595 | $8395 |
| Sold By | ProVision Paint Supply | TCP Global Corp |
| Item Dimensions | 9.06 x 6.69 x 10.35 inches | 12 x 12 x 10 inches |
Is Raptor liner a good bedliner?
Absolutely! It’s extremely durable, easy to apply, and affordable. If you’re using it for its intended purpose (most typically, bedliner coating), this is hands down one of the best bed liners on the market.
Why do Raptors have liners?
RAPTOR is a tough and durable protective coating that provides with a protective barrier to withstand the toughest situations. Spray or roll on RAPTOR as a truck bedliner or use to protect industrial surfaces, marine, off-road vehicles and much more.
Is Raptor bedliner waterproof?
RAPTOR is also water resistant and helps to protect surfaces from rust, making it perfect for surfaces that are frequently exposed to water, including salt water.
How many sq ft does Raptor liner cover?
The 1 US Gallon Raptor Kit is the industry standard in bedliner coating. Each kit contains four bottles of Raptor and one tin of hardener. Each kit covers approximately 125 square feet, enough to do a full size pick-up truck bed.
Do you need to primer before Raptor liner?
No need to prime again unless you sand down to bare metal. Remember, if it’s been more than 5 hours since the last coat of RAPTOR has been applied, allow RAPTOR to cure for 24 hours, then lightly scuff and apply additional coat(s).
How much Raptor liner do I need for whole truck?
Can you put Raptor liner over rust?
You can use Raptor liner over powder coating and other finishes with proper prep. But Raptor will not tolerate rust at all. Also you have to let what ever you treat the rust with to fully cure. In the case of POR-15 that is 96 hours.
How many coats of Raptor liner can you apply?
2-3 coats
The recommended RAPTOR application is 2-3 coats with a 60 minute flash time between coats. If further build is needed, it is recommended to carry this out in several applications. For instance, apply the first 2-3 coats, bake or allow 24-hours to dry and then apply another 2-3 coats, etc.
How long does it take for Raptor liners to dry?
Raptor can be overpainted with Raptor and most modern paint systems. When overpainting prepare the surface as follows; Raptor should be allowed to dry for 24-hours.
How do you prepare for a raptor liner?
RAPTOR can be used on most plastic without much preparation. Scuff the plastic with 180-240 grit sand paper or red scotch and then apply an adhesion promoter, like RAPTOR Adhesion Promoter (UP5024). Wait about 20 minutes before applying RAPTOR.
