How do you fix an F3 error on a Maytag oven?

Both the Maytag oven F3 error code and F4 code indicate there is an issue with the temperature sensor so the cook mode on your oven will stop. Check the sensor to make sure it is closed and there are not issues with the wiring or connection first. If the temperature sensor is damaged or not working, replace it.

What does F2 mean on a Maytag oven?

Oven Temperature Too Hot
F2 – Oven Temperature Too Hot – Replace relay board (if present) or oven temperature sensor. Check sensor harness. F3 / F4 – Shorted or Open Oven Temperature Sensor (RTD) – Check the connection between the oven control and oven sensor, as well as the sensor harness.

What does F3 E2 mean on a Maytag stove?

There may be a problem with the Oven Temperature Sensor, the Warming Drawer Sensor (if so equipped), or the associated wiring. Power unit down by turning off the circuit breaker(s) for one (1) minute.

How do I reset my Maytag oven?

Reset power to the product:

  1. Power unit down by turning off the circuit breaker(s) for one (1) minute.
  2. Power unit up by turning on the circuit breaker(s).
  3. Start a bake cycle.
  4. Monitor the oven for one (1) minute to ensure the error code does not display again.
  5. Verify oven operation.

How do I stop my oven from F2?

If the F2 error code has frozen on the oven after shutting down, then unplug the oven for 30 seconds. Plug the oven back in and see if the error code appears again. At times glitches will occur and the error code will randomly appear.

Why is my oven beeping and F2?

If your GE oven has an F2 (or F20) error code, the oven is detecting that the temperature inside the oven has exceeded a preset threshold. In plain English, it means the temperature has exceeded 615 degrees, or 915 degrees Fahrenheit during a self-cleaning cycle.

What does F3 mean on a Maytag washer?

Possible Solutions The F3 E1 alert indicates the washer can’t detect the water level. There may be an issue with the appliance control unit or associated wiring.

What does F3 mean on my oven?

F3. This code usually means that the oven sensor needs to be replaced.

Does a Maytag oven have a reset button?

Press the Cancel button or pad to reset. This message will be displayed when a fault or error has been detected. If Call Service is displayed after pressing Cancel, reset power to the product.

Why does my oven beep and say F3?

When the F3 code flashes on your GE oven, this indicates that there is a fault with the oven temperature sensor. There are a few parts that could be causing the fault. These include the wire harness, control board or the oven temperature sensor itself.