What is carbon black surface area?

The surface areas of a number of commercial carbon blacks have been determined by the low-temperature adsorption isotherm technique. Thermal decomposition and other nonimpingement type blacks possess areas of 15 to 64 M2 per gram.

What are the properties of carbon black?

Three Main Properties of Carbon Black

  • Particle Size. The diameter of spheric particles is the fundamental property which largely affects blackness and dispersibility when carbon black is mixed with resins or other vehicles.
  • Structure.
  • Surface Chemistry.

Is carbon black volatile?

Surface and surface chemistry It is also known to be a non-conductive material due to its volatile content. The coatings and inks industries prefer grades of carbon black that are acid-oxidized.

What can carbon black be used for?

Carbon black is mainly used to strengthen rubber in tires, but can also act as a pigment, UV stabilizer, and conductive or insulating agent in a variety of rubber, plastic, ink and coating applications.

What is the surface area of carbon?

Due to its high degree of microporosity, one gram of activated carbon has a surface area in excess of 3,000 m2 (32,000 sq ft) as determined by gas adsorption. Charcoal, before activation, has a specific surface area in the range of 2.0 – 5.0 m2/g.

Does carbon black absorb moisture?

Compounds containing carbon black usually absorb moisture when exposed to air. This can create processing problems, surface defects or internal cavities in the finished part.

What is carbon black material?

carbon black, any of a group of intensely black, finely divided forms of amorphous carbon, usually obtained as soot from partial combustion of hydrocarbons, used principally as reinforcing agents in automobile tires and other rubber products but also as extremely black pigments of high hiding power in printing ink.

How much surface area does activated charcoal have?

The quality of the various charcoal products depends on the size and surface area per gram of charcoal. On average, 1 g of activated charcoal has approximately 1000 square meters of surface area. Activated charcoal is produced by heating wood pulp to 900° C and, then washing it with inorganic acids and drying it.