Can Awlcraft 2000 be brushed on?

Awlcraft 2000 is not brush or rollable. They say it in their application sheets and with good reason, it just doesn’t work! You may get lucky with conditions now and then but it’s not likely. Regular Awl Grip can be with enough practice but it takes a lot of experience to get it as smooth as spraying.

How long does Awlcraft 2000 take to dry?

Anticipated Cure Time at 77 F/ 50% R.H.: 24 hours to tape free, 3 days to light service, 14 days for full cure. Best results are achieved when sprayed over properly prepared Awlgrip 545 Primer. May be applied directly over some existing finishes.

Can you roll and tip AwlCraft 2000?

You can’t roll/tip AwlCraft 2000 and it is not as durable as Awlgrip.

What is AwlCraft?

Awlgrip AwlCraft is a premium acrylic urethane topcoat paint. Awlcraft 2000 has a superior flow-out, higher gloss, and easier application than the original Awlgrip. It is fast drying to reduce dust entrapment, and can only be applied by spraying. This is an above the waterline only paint.

Can you wet sand and buff Awlcraft 2000?

As long as it Awlcraft 2000 it can be wet sanded. There is another Awlgrip paint that can not be wet sanded.

How do you mix Awlcraft 2000?

Mix by volume two parts Awlcraft 2000 Topcoat base component with one part Awlcat #5 (G3039) spray converter to a smooth, homogenous mixture.

Can you polish Awlcraft?

Do not use polishing compounds on Awlgrip G/H Line topcoat. Awlcraft 2000 and Awlgrip HDT: Awlcare Protective Polymer Sealer will help maintain the gloss on these finishes with regular applications, especially those which have been buffed or polished. Remember, Awlcare is only applied and buffed by hand.

Can you sand Awlcraft 2000?

What is the mixing ratio for Awlcraft 2000?

Mix by volume two parts Awlcraft 2000 Base with one part Awlcat #2 (G3010) Spray Converter to a smooth, homogenous mixture.