How much is concrete per cubic metre Melbourne?

$200 to $300 per cubic metre
Concreting can cost $50 to $150 per square metre, subjective to the levelling required, type of finish used and size of the job. Per m3 you can expect to pay $200 to $300 per cubic metre.

How much does it cost for 1 cubic meter of concrete?

The Labour cost for concrete work is around 70 to 75 Rs per cft (cubic foot) or 2500 to 2650 Rs per cubic meter (m3). The Labour Cost for PCC concrete is around 30 to 35 Rs per sq ft (square foot) or 320 to 400 Rs per cubic meter (m3).

How much is concrete per sqm Australia?

The cost of a concrete house slab per square metre in Australia ranges from $64 to $108 and most commonly the price depends on the thickness of the concrete slab as well as the location you are living in.

How much is a truckload of concrete Australia?

A fee of $80.00 per metre cube is charged for a load of concrete truck delivered to the construction site.

What is MPa concrete for driveways?

25 MPa
20 MPa and 25 MPa Commonly used for house slabs, driveways, footings and footpaths.

How much does a concrete driveway cost Melbourne?

$60 to $85 per square meter
How much does a concrete driveway cost in Melbourne? On average, it costs $60 to $85 per square meter to install a plain driveway in Melbourne, Victoria. For a small, single-car driveway that’s 3m wide and 6m long, you can expect to pay around $1,080 to $1,530 to commission a pathway.

How do you calculate concrete cost?

Use $90 per cubic yard as a ballpark figure for concrete prices, but concrete slab cost will vary by region. Also, expect a fee of about $60 per load for delivery from a concrete truck for concrete cost. There could be other fees for such things as Saturday concrete truck delivery and small loads.

How much should I charge for pouring concrete?

The national average cost of a concrete slab is $6.60 per square foot for materials and labor. Most homeowners can expect to pay between $4.34 and $7.73 per square foot for concrete installation.

How many 20kg bags of cement makes a cubic metre of concrete?

108 x 20kg bags
one 20kg bag will cover an area of 1.1m2 to a depth of approximately 10mm. or 108 x 20kg bags equates to one cubic metre of mixed concrete. Concrete Mix comes 20kg plastic lined, multi-walled paper sacks, and small handy 10kg plastic bags.

Is 25 MPa concrete strong?

(a) The 20 MPa and 25 MPa compressive strengths, on the one hand, are usually used for house slabs, driveways, footings and footpaths.

What is the mix for 25 MPa concrete?

For a medium-strength 25 Mpa mix, use a ratio of one container of cement, two and a half containers of river sand, and two and half of stone. For the higher-strength 30 Mpa mix, you can use one container of cement, one and three-quarters of river sand, and one and three-quarters of stone.