How do I use TL WA801ND?

Accessing the Access Point Configuration Menu

  1. Power up the access point (TL-WA801ND).
  2. Manually assign a static IP address to the computer in 192.168.1.x range with subnet mask of 255.255.255.0.
  3. Connect the computer to the LAN port of the access point.
  4. User name and password both are admin.

How do I reset my TL WA801ND?

TL-WA801ND Directly press and hold the reset button on the rear panel with a pin for approximately 10 to 15 seconds when the device is running, then release the pin, the device will be reset and reboot automatically.

How do I configure my TP link router as an access point?

How to change a TP-Link router to AP mode

  1. Connect a computer to the TP-Link router and launch a web browser.
  2. Visit the following router configuration page: 192.168.1.1.
  3. You are prompted to enter a username and password.
  4. Click the Mode button on the upper-right corner, select Access Point and click Save.

How do I set up my TL WA701ND?

Connect the computer to the AP with an Ethernet cable. Open the web browser and type the IP address of the access point (Default is 192.168….How to configure TL-WA701ND V2, TL-WA801ND V2, TL-WA901ND V3 or TL-WA7210N as a repeater?

  1. LAN IP: 192.168. 0.1.
  2. SSID: test ABC.
  3. Encryption Type: WPA2-PSK.
  4. Passphrase: 11667063.

Why is my tp-link Wi-Fi extender not working?

Check the wireless signal strength of the end devices. If only one end device cannot join the Wi-Fi of the range extender, remove the profile of the wireless network and connect it once again. And connect it to your router directly to see if it can connect.

What is the default password for tp-link Wi-Fi extender?

admin
The default IP address is 192.168. 0.1(or http://tplinkwifi.net ), and the default login username and password both are admin (all lower case).

Can I use TP-link router as Wi-Fi extender?

But what happens if your home is too large for a single Wi-Fi router to cover? If that’s the case, you can always get another TP-Link Wi-Fi router and use it as a repeater. That means you will get to extend the coverage of your primary router, so it covers the entire house.

Can you use 2 Wi-Fi Extenders at the same time?

You can use two extenders. However, it could lead to unsatisfactory performance for the second one. You can also daisy chain more WiFi extenders but it may reduce the throughput of your device. So, you may want to consider connecting each extender to the main router.

How far will a Wi-Fi bridge work?

Range: Because wireless bridges rely on wireless signal, checking their range is highly important. Fortunately, most wireless bridges offer a range rating like 2 miles, 3 miles, and even 5 miles in some cases for high versatility.