How do I reset my Electrolux dishwasher screen?

To reset an Electrolux dishwasher, you need to hold the start button down for three to four seconds. If that doesn’t work, switch your dishwasher off at the main power supply. If this still doesn’t fix the issue, there may be issues with the door latch, water line, or power cord.

Why is my dishwasher panel not working?

There are several easy options that may be causing your dishwasher control panel problems, including the following: The dishwasher control panel needs to be reset. The dishwasher control panel problem is caused by a lack of power. A child lock has been activated, causing your dishwasher control panel problems.

Why is my Electrolux dishwasher is not starting?

If you find your Electrolux dishwasher not starting or filling, even if it has power, there may be a water supply issue. Check the water supply hose for kinks that can restrict water flow, straightening out the hose if necessary.

How do I unlock my Electrolux dishwasher screen?

If your Electrolux dishwasher door locked and won’t open, this code will appear. You won’t be able to run a cycle without unlocking the door. Press and hold the AIR DRY button on the control panel for at least 3 seconds while the door is latched. This should unlock the door or activate the control panel for use again.

How do I test my dishwasher control panel?

To determine if the control or keypad is faulty, do the following test:

  1. Unplug dishwasher or disconnect power.
  2. Open the dishwasher door.
  3. Open console and disconnect the keypad ribbon connection from the control (at P1).
  4. Put console back together.
  5. Plug in dishwasher or reconnect power.
  6. Wait 5 seconds.

How do I get the lock off my Electrolux dishwasher?

If your dishwasher does not have a designated door lock or child lock button, you will need to hold down the air dry button on the control panel. Hold down the button until you see the lock disengage. Once done, you will be able to both open the door or run the cycle.