What grade of plywood is used for roof sheathing?

What grade of plywood is used for roof sheathing?

CDX Plywood is used primarily by contractors to build exterior walls and roofs. CDX plywood has one side veneer grade “C” and one side veneer grade “D”. The two are bonded together with glue which can withstand a little moisture. The APA would recognize CDX Grade Plywood as C-D Exposure 1 plywood.

What type of plywood should be used on a roof?

Most Common Thickness For rafters spaced 20 or more inches apart, 1/2- or 5/8-inch plywood is recommended. The most common rafter spacing is 24 inches, and 5/8-inch plywood is recommended for that. It will support roof loads for most situations and is the standard for most roof applications.

What is the best sheathing for a roof?

What Type of Sheathing Is Best for a Roof? Oriented Strand Board, OSB, is currently the best choice for roofs. It’s durable, water-resistant, and very cost-efficient. It also has a very consistent thickness, so you don’t have to worry about weak or uneven spots.

Is OSB or CDX better for roofing?

Although some people will ultimately choose CDX, many experts argue that OSB is better overall for roofing. OSB is far less likely to expand and contract when exposed to humidity and moisture, even though it will take longer to dry. With wrapping, though, it can withstand the elements without issue.

What is difference between CDX and RTD plywood?

RTD and CDX plywood are essentially the same exposure 1 graded plywood, except for the superior manufacturing quality of the RTD plywood. This higher quality in the manufacturing process is what makes the RTD plywood a superior product to its CDX predecessor.

Is 7/16 OSB OK for roofing?

OSB is the most-used sheathing material for new roofs and roof replacements. You can use 7/16-inch thick OSB sheets without support for areas where the snow load is 30 pounds per square foot because it’s durable and maintains building integrity much longer than other sizes.

What thickness should roof sheathing be?

What is this? Standard roof sheathing thickness is ½” to ⅝” thick. If you are using OSB for your roof deck, then ⅝” is the recommended thickness. For plywood, which is slightly stronger than strand board, ½” thick is appropriate.

What is the difference between ACX and CDX plywood?

As such, a sheet of A-C plywood will be very well finished on the face with a relatively unfinished back. Conversely, construction-grade plywood would be C-D (commonly referred to as CDX plywood), which is great for structural use but not suited to be finish material.

Can you use CDX plywood roof sheathing?

CDX Plywood Plywood gets it strength from multiple layers of wood bonded together. The wood grain alternates from layer to layer, adding significantly to the strength of the plywood sheet. A special grade of plywood called “CDX” is a popular choice for roof sheathing.

How far can you span 7/16 OSB?

24
2304.8 Floor and Roof Sheathing

What thickness OSB should be used for roofing?

Standard roof sheathing thickness is ½” to ⅝” thick. If you are using OSB for your roof deck, then ⅝” is the recommended thickness. For plywood, which is slightly stronger than strand board, ½” thick is appropriate. Another factor is how far apart your trusses or rafters are spaced.