How far apart are studs commonly placed in a non bearing wall?

How far apart are studs commonly placed in a non bearing wall?

The studs are placed 16 inches on center for most interior load-bearing walls and non-load-bearing walls as well as exterior load-bearing walls.

What is the standard spacing between studs?

The general spacing for wall studs is 16 inches on center, but they can be 24 inches.

How far apart are studs in a 1950s house?

Wall studs in modern homes are spaced 16 inches on center — that is thedistance from the center of one wall stud to the center of the next is 16inches. In older homes, studs may be 24 inches apart, or spaced irregularly.

Do non load-bearing walls have studs?

Non-load-bearing walls can have vertical studs spaced as far apart as 24 inches, on-center. Since non-load-bearing walls only bear the weight of drywall and some electrical and plumbing work within, it is possible to have wider apart studs.

How thick is lath and plaster?

A traditional 3-coat plaster is typically 7/8″ thick and when you add in the 1/4″ wood lath that supports the plaster wall, you have a wall that is more than 1″ thick! Compared to today’s most common drywall thickness of only 1/2″, that is a difference worth noting.

What are the common stud spacing is used in residential construction?

Standard stud spacing is 16 inches on center and is rarely greater than 24 inches, even on center in older houses. Most electrical boxes for switches or outlets are attached to a stud on one side. There are studs on either side of a window.

How do you find lath and plaster studs?

The lath and plaster construction makes it challenging to pinpoint the studs to mount heavy objects like shelves and electronics. A multi-scanner and metal detecting stud finder that pegs down nails that fix the lath to a stud instead of detecting density will hit the “sweet” spot.

Why don’t studs work on lath and plaster walls?

Prior to the 1950s, most walls were built using a combination of vertical studs, horizontal wooden beams called laths and plaster seams. Because standard stud finders detect a change in density inside the wall, they don’t work on lath and plaster — the density inside these walls is not constant enough.

How far apart should studs be for non load-bearing walls?

While it is recommended to make sure the studs are 16-inches apart, a little further won’t hurt for non-load-bearing walls. Everything you need to know about load-bearing walls is quite extensive because your house’s structural integrity depends on it.

What is the correct measure of stud spacing?

That is to say, the distance from the center of one stud to the center of the adjacent stud (s) is the correct measure of stud spacing. “On center” is an important distinction to make because it eliminates the potential confusion created by the different studs in a wall: standard studs, king studs, cripple studs, and California Studs, for example.