How long do EdenPURE heaters last?

The big SCAM not mentioned is the advertised life of the Edenpure US-1000 or Gen4 heaters. Suarez Corporation Industries is advertising a 20,000 hour bulb life and a 10-15 year “service” life (website, printed literature and printed on carton) for both their Edenpure US-1000 and Gen4 heaters.

Why does my EdenPURE keep shutting off?

Why is my EdenPURE 1000 heater automatically turning off or blowing cold air? A dirty filter will result in the unit to automatically shut down, blow cold air or not function at all. For filter cleaning instructions, please refer to the EdenPURE 1000 product manual. It is very important to keep heater filter clean.

How do you troubleshoot an EdenPURE heater?

How to Troubleshoot an EdenPure

  1. Check that the EdenPure portable heater is plugged into a reliable, functioning power outlet if the heater turns off, has poor heat output or doesn’t turn on.
  2. Reset the heater’s thermostat if the room isn’t warming sufficiently.

How do I change the bulb in my EdenPURE?

Disconnect each bulb and remove them one at a time from the unit through the open back panel. Be careful not to break or shatter the lamps. Gently insert the new bulbs one at a time into the vacant sockets. Fit the back panel onto the rear of the heating unit.

Is there a reset button on EdenPure heaters?

Unlike most small appliances, the Edenpure heater has no reset button. Edenpure’s design requires disconnecting the power source for a specified amount of time to reset the sensors.

Do EdenPure heaters use alot of electricity?

According to their specifications, they use 12800 watts per hour (that’s 1.28 kilowatt hours for every hour). If the heater runs eight hours while you are home, in one room, that can equal 10.2 kilowatt hours per day or $1.40 per day. In one month, that can add $42 to your electric bill.

Is there a reset button on EdenPURE heaters?

Do EdenPURE heaters use alot of electricity?

Is there a fuse in an EdenPURE heater?

EdenPURE heaters are equipped with a thermal fuse that automatically shuts off the power if it detects abnormally high temperatures. Placing furniture or other large items in front of the heater commonly causes the problem. Plug the unit back after 30 minutes and the obstruction is clear.

How do I reset my EdenPURE thermostat?

First, you should unplug the heater’s power cord from the power outlet for at least 30 minutes. This will reset the internal electronics of the EdenPURE 1000 heater. Finally, plug the power cord back in to the power outlet and then, attempt to operate the heater again.