How do you read a Badger Meter?

The Badger ADE meter is read from left to right. The first 4 numbers are the 1000’s that we read (example – 453,286 gallons total went through this meter since it was installed). If the RED circle is moving, there is water currently flowing through the meter. The Sensus meter is read from left to right.

How do you calibrate a badger water meter?

Turn power to meter off and record calibration number. Set calibration number on board to 9999. Disconnect wires going to terminal 1 and 2 from meter transmitter (Green and black wires coming from underneath board). Attach jumper wire to terminal one, turn power to meter back on.

What does a Badger Meter do?

Badger Meter, Inc. manufactures and markets flow measurement and control products. The Company’s products are used to measure and control the flow of liquids and gases in a variety of applications.

How does ultrasonic water meter work?

Ultrasonic flowmeters use sound waves to determine the velocity of a fluid flowing in a pipe. At no flow conditions, the frequencies of an ultrasonic wave transmitted into a pipe and its reflections from the fluid are the same.

How much does it cost to calibrate a flow meter?

between $5,000 to $75,000 USD
A facility that has a meter bolted to downstream and upstream piping at ground level will have lower costs. The cost of flow meter calibration varies between $5,000 to $75,000 USD.

What is water meter calibration?

Water Meter Calibration. “To ensure that the water meter is performing as designed and that it. meets the necessary performance requirements put in place by the national. legal metrology organization”

Where are Badger meters manufactured?

In 1966 Badger expanded into South America with a velocity meter manufacturing plant in Peru and then later established a subsidiary in Ecuador.

Where are Badger water meters made?

Although it is an international company, Badger Meter’s corporate headquarters, engineering, sales and marketing, customer service, and manufacturing for selected products for the utility and industrial markets reside in Milwaukee.

How do you read a badger water meter in cubic feet?

Read all of the numbers from left to right that appear under the words “Cubic Feet.” The first digit on the right represents one cubic foot. The second from the right represents 10 cubic feet. The third from the right (usually a different color) represents 100 cubic feet (one ccf) 748 gallons.