How do I access my Netgear NAS admin page?

To access the local admin page:

  1. Open a web browser and visit https://. is the name that you assigned to your ReadyNAS system or the default host name if you did not change it.
  2. Accept the certificate. A login prompt displays.
  3. Enter the login credentials for your system and click the OK button.

How do I access ReadyNAS shares?

To access a share using a network-attached Windows device:

  1. Ensure that the SMB file-sharing protocol is enabled on your ReadyNAS system.
  2. Enter in the Windows Explorer address bar.
  3. Enter a user ID and password.
  4. Windows Explorer displays the contents of all available shares on your ReadyNAS system.

How do I find the IP address of my Netgear NAS?

To find the IP address of your ReadyNAS download and run RAIDar. Access the web admin page of the ReadyNAS by clicking Admin Page in RAIDar or enter the URL https://ReadyNAS_IP_address/admin – where ReadyNAS_IP_address is the IP Address seen in RAIDar.

How do I direct connect between ReadyNAS and PC?

How do I direct-connect between ReadyNAS and PC/Mac?

  1. Assign a static IP address to the ReadyNAS, and set your PC with a static IP in the same subnet.
  2. Connect the ReadyNAS and PC NIC using a straight or crossover Ethernet cable.
  3. Power on the ReadyNAS and scan with RAIDar to locate the ReadyNAS.

How do I change my Netgear ReadyNAS IP address?

Click Change adapter settings. Right click on the connected NIC and click Properties. Select Internet Protocol Version 4 (TCP/IPv4) > click Properties. Select Use the following IP address > Enter an IP address in the range of 169.254.

How do I share a folder on my Netgear NAS?

To create a share:

  1. Log in to the Admin page.
  2. Select Shares > Shares. A list of shares and LUNs on each volume displays.
  3. Click the New Share button to the right of the volume to which you want to add a share.
  4. Configure the settings as explained in the following table: Item. Description. Name.
  5. Click the Create button.

How do I access ReadyNAS duo?

Type “https://192.168.168.168/admin” (without quotation marks) into the address bar of your browser and then press “Enter.”

What is SMB Plus?

Use the SMB Plus app to adjust advanced SMB settings on ReadyNAS OS 6 devices. The settings that can be changed include the SMB Protocol Version and Oplocks (enable/disable). NETGEAR recommends that you only use this app if you are an advanced user or support has instructed you to do so.

How do I change my IP address on ReadyNAS duo?

Change the IP address on the ReadyNAS to match the existing LAN subnet. Go to the IPv4 tab. Change the Configue drop down menu to Static. Enter an Address, Subnet Mask and Router to match the existing network (seen in Step 1).

Is Netgear ReadyNAS frontview really catering to the Linux user?

It would help if it said “Frontview” in the header rather than just “Netgear REadyNAS”. It feels a little too much like this product is not really catering for those of us who aren’t particularly LINUX savy as certainly my own experience so far has not been a smooth one.

How do I access the ReadyNAS admin page?

Access ReadyNAS Admin Page 1 Open a web browser and visit https://. is the name that you assigned to your ReadyNAS system or the default host name if you did not change it. 2 Accept the certificate. A login prompt displays. 3 Enter the login credentials for your system and click the OK button. See More….

How do I find the IP address of my ReadyNAS?

Note: You can also enter https:// , where is the IP address of the ReadyNAS. An SSL certificate security warning displays.

How do I refresh the screen on my ReadyNAS?

To refresh the screen, click the Refresh icon () in the top right corner below the navigation bar. For help information about your ReadyNAS, click the Help icon () in the top right corner of the screen. To shut down or restart your ReadyNAS, click the Powericon () in the top right corner of the screen.