How do you reset the service due on a Nissan Qashqai?

How To Reset Nissan Qashqai Service Indicator

  1. If your ignition is on, turn it off and then back on.
  2. Press the right button next to your speedometer until you reach the settings section.
  3. Once you reach the settings section, keep the button pressed until a new menu appears.

How do you reset the service light on a 2011 Nissan Qashqai?

Nissan Qashqai 2010 – 2014 service interval reset ign on press once right button twist right button (knob) until maintenance is hilighted press once to select curent interval is displayed on some models there is a reset button in this menu if no reset is found, go back one level, select factory then choose reset.

How do you turn the service light off?

With the key out of the ignition find and press the odometer reset button (hold down) Turn the ignition on (warning lights come on) wait about 10-15 sec until most or the lights are off (still pressing odometer reset button) Turn ignition off (button still pressed) and remove the key. Release reset button.

How do you reset the service light on a 2010 Nissan Qashqai?

2010-2013 Nissan Qashqai

  1. Turn on the ignition without starting the engine. If your car has a Smart key button, press the START button two times without step on any pedal.
  2. Go to the SETTING screen.
  3. Hold down the TRIP button.
  4. Scroll down to MAINTENANCE.
  5. Select SERVICE.
  6. Select RESET.
  7. Confirm to reset.

How do you reset the oil life on a Nissan Qashqai 2019?

Nissan Qashqai Maintenance Oil And Filter Light Reset Guide

  1. Turn on the ignition without starting the engine,
  2. Get to the SETTINGS menu.
  3. Find the MAINTENANCE.
  4. Select the SERVICE or OIL & FILTER.
  5. Press the ENTER button.
  6. Select YES.

How do I reset the service indicator on my car?

Step 1 – Start the engine. Step 2 – If a service is due the display will show “Service required”. To reset this message, locate and press the OK button located at the top right of the steering wheel for more than 1 second. Step 3 – The service interval will be reset to the default setting.