How is recurve Amo length measured?

ANSWER: The easiest way to measure the length of your traditional bow is to start at the string groove, follow the curvature of the limb along the belly side of the bow, across the riser area, and follow the curvature of the other limb to the other string groove. This will give you the a.m.o. bow length.

How long should a recurve bow string be?

If you shoot a recurve, your bowstring is usually 4 inches shorter than the bow’s length. If you shoot a longbow, the bowstring is 3 inches shorter.

What is Amo bow string length?

AMO bow length is the length of the string plus 3 inches. So a 66 inch AMO bow is supposed to take a 63 inch string. But, some people sell strings by “AMO” length rather than actual length, so your AMO 66 inch bow takes an AMO 66 inch string (actual length 63 inches).

How long should a string be for a 64 inch recurve bow?

34” for AMO 64” bow, 35” for AMO 66” bow, 36” for AMO 68” bow, 37” for AMO 70” bow, 38” for AMO 72” bow.

What is AMO draw length?

AMO DRAW LENGTH STANDARD For Manufacturers: Draw Iength is a specified distance, or the distance at the archer’s full draw, from the nocking point on the string to the pivot point of the bow grip (or the theoretical vertical projection of a tangency line to the pivot point parallel to the string) plus 1¾”.

What does Amo size mean?

AMO length is a standard measurement of bow length that is designated to be three inches longer than the bowstring. It usually applies to Recurve Bows and other “conventional bows”.

Can you leave a recurve bow strung?

Modern recurve and longbows made from synthetic materials can be left strung for up to 3 weeks, but should be unstrung for long-term storage. Compound bows can be left strung indefinitely.

Do you twist a recurve bow string?

You twist the bowstring, to make the bowstring shorter. to make the bowstring short enough, until you get the correct brace height.

What size string do I need for a 62 inch bow?

String length is another critical consideration. Your bow’s AMO (Archery Manufacturer and Merchant’s Organization) length is marked on its lower limb. To achieve the correct brace height you will need to use a bowstring of the same AMO length. (Example: An AMO 62” bow requires an AMO 62” string).

How long should a 66 bow string be?

63”
A 66-inch recurve bow would get a 63” string, for example.

What is AMO speed in archery?

Back in the day when bows were slower and 3D wasnt such a big deal, companies mostly gave the AMO (archery manufacturers organization) speed, which rated a bow @9 grains per pound and 30 inches of draw @60 lbs of weight.

What does Amo mean on a recurve bow?

Archery Manufacturers Organisation
The industry has a standardised method of measuring arrow length, and you will often see this referred to as AMO Length. AMO stands for Archery Manufacturers Organisation. This is the method where a measurement is taken between the groove of the nock and the front end of the shaft.

How to measure the AMO of a recurve bow?

With this measuring tape, measure along the unique curve of the recurve bow limb starting from one string groove to another. You can likewise do your measurement from tip-to-tip in order to discover the AMO and afterward subtract appropriately based on the make of the bow.

What is the correct bow string length for a 58″ Amo?

They consider a bowstring length of 3″ as the correct string length on a longbow. While on a recurve bow, it is 4″ less the AMO. This implies that for a 58″ AMO, we would require a 55″ bowstring length for a longbow and a 54″ bowstring length if it were a recurve bow.

The basic rule of thumb that the AMO proposes is that the bow string length should be 3″ shorter than the actual recurve bow length. Most (if not, all) pro or archery shops follow this standard. However, it’ll never hurt to ask and find out if a shop does follow this rule or not! Measuring your length manually works too.

What is an AMO bow?

Let’s start with the very beginning! What is AMO? AMO stands for Archery Manufacturers Organization. It was marginally created to be a set of standards for bows just like the bow length.