What screwdriver Do you need to open a PS3?

What screwdriver Do you need to open a PS3?

Use the Torx Screwdriver (T8 or T10) to remove the torx screw from the space behind the rubber foot. This screw has a security bit but most are able to remove it successfully with a normal Torx driver.

What Torx screw size is PS3?

T10 Security Torx Tamper Proof Screwdriver with hole PS3 Fat Playstation Console Tool XBOX 360 YLOD.

What can I use instead of a torx 8?

Sometimes an allen key will work, or even a flat blade screwdriver if it will jam between opposite points in the recess. Either way, be ready to replace the screw and/or the tool used because of damage. Your best bet is just to get a Torx key.

How do I open the fat on my PS3?

Remove the HDD cover on the left side of the PS3. You will need to unscrew a blue screw that is very easy to strip, so be careful when unscrewing it. Pull the hard drive straight out once you remove the screw. While you are looking at this side, remove the sticker towards the top of the case to reveal a Torx screw.

Why is my PlayStation 3 so hard to protect?

It may be suffering from a buildup of dust after years of use. If you want to protect your PlayStation, you may want to take a stab at cleaning out the insides. This can be a daunting task, as the PlayStation 3 is carefully constructed, but with a little preparation you can take a lot of the stress out.

How do I open the case of a PS3?

Before you open the case, you will need to remove the hard drive. Luckily, the hard drive on the PS3 is fairly simple to remove. Remove the HDD cover on the left side of the PS3. You will need to unscrew a blue screw that is very easy to strip, so be careful when unscrewing it. Pull the hard drive straight out once you remove the screw.

How to fix a PS3 that won’t turn on?

This can be a daunting task, as the PlayStation 3 is carefully constructed, but with a little preparation you can take a lot of the stress out. See Step 1 below to get started. Disconnect the PS3. Before opening the system up, make sure that you have disconnected the power cable and the video cable, as well as anything plugged into the USB ports.

How do you remove the hard drive on a PS3?

Remove the HDD cover on the left side of the PS3. You will need to unscrew a blue screw that is very easy to strip, so be careful when unscrewing it. Pull the hard drive straight out once you remove the screw.