What engine was in a 1958 Chevy?
What engine was in a 1958 Chevy?
Third generation (1958)
| Third generation | |
|---|---|
| Powertrain | |
| Engine | 235.5 cu in (3.9 L) 145 hp Blue Flame I6 283 cu in (4.6 L) Small-Block V8 348 cu in (5.7 L) Big-Block 250–315 hp V8 |
| Transmission | 3-speed manual 2-speed Powerglide auto. |
| Dimensions |
What engine does a Chevy Bel Air have?
With a curb weight of 3393 lbs (1539 kgs), the Bel Air 3.9 has a naturally-aspirated Inline 6 cylinder engine, Petrol motor. This engine produces a maximum power of 142 PS (140 bhp – 104 kW) at 4200 rpm and a maximum torque of 285.0 Nm (210 lb. ft) at 4200 rpm.
What size was the largest engine offered in the 1958 Chevrolet cars?
Chevrolet’s largest engine in 1958 was their first big-block, the 348-cu.in. V-8; it used a 4.125 x 3.25-inch bore and stroke and came in four basic states of tune. The Super Turbo-Thrust 348 used a 4-bbl. Carter AFB carburetor to give 250hp at 4,400 rpm and 355 lbs.
What engine came in a 1957 Chevy Bel Air?
For 1957 there were four standard engine options, a 235.5 cu in (3,859 cc) inline 6-cylinder producing 140 hp (104 kW), a 265 cu in (4,340 cc) V8 “Turbo-Fire” producing 162 hp (121 kW), and two 283 cu in (4,640 cc) V8s: a “Turbo-Fire” twin-barrel carburetor producing 185 hp (138 kW) and a “Super “Turbo-Fire” four- …
Is the 348 a good motor?
The 348 should be remembered not as a mighty powerhouse, but as a smooth and reliable big-block for the new, larger Impala. Its 10-second 0-60 mph capability was about the norm for 1958 – hardly the kick-in-the-back acceleration provided by the FI or dual-quad 283s.
What year did Chevrolet make a 348 engine?
1958
First appearing in 1958, the 348 was available through 1961 in cars and 1964 in trucks. It had a bore of 4.125 inches and a stroke of 3.25 inches and was offered in an assortment of horsepower ratings. The base engine was dubbed the Turbo-Thrust and was rated at 250 hp.
Did Chevy make an impala in 1958?
The Chevrolet Impala (/ɪmˈpælə, -ˈpɑːlə/) is a full-sized car built by Chevrolet for model years 1958 to 1985, 1994 to 1996, and 2000 to 2020. The Impala was Chevrolet’s popular flagship passenger car and was among the better-selling American-made automobiles in the United States.
How much does a 1958 Chevy Impala weight?
3458 lbs.
1958 Chevrolet Bel Air Impala Info Curb Weight: 3458 lbs. Vehicle Length: 209.1 in.
What year did the 327 come out?
1962
The 327 debuted in 1962. It featured a 4.00-inch bore and a 3.25-inch stroke, increases of an eighth-inch and a quarter-inch, respectively, over the 283.
How much horsepower did a 1957 Chevy Bel Air have?
Initially, the new engine was offered with either a two-barrel carburetor and an output of 162 horsepower, or with a four-barrel and the resulting 180 horsepower. A bigger 283 V-8 was brought out later, and with a four-barrel carburetor it made 220 horsepower.
