What are the parts of an engagement ring called?

Engagement rings have a head, mounting, shoulder, side stones (not always), prongs, a peg, and shank. Head: The head is the part that holds the diamond, and is usually 14k gold (white). Prongs: The prongs are part of the head and comprise most of it.

What are the shoulders of an engagement ring?

4- Shoulders The shoulders of a ring are the sloping sides that lead up to the center of the design. The shoulders are what holds the head of the ring. These are often studded with accent stones to enhance the beauty of the design.

What holds a diamond in a ring?

The head is the primary object that holds in the Diamond. The head is made up of the Prongs along with the base and usually a peg on the bottom to hold it to the mounting. The Mounting is basically the entire ring not including the center stone and is also referred to as the Setting.

Does the band go on top or bottom of engagement ring?

According to tradition, the wedding band should go on first, with the engagement ring stacked on top. Even etiquette experts agree that the way to wear a wedding set is by placing the wedding band on the bottom. However, while there may be a “proper” way to wear your rings, the choice is ultimately up to you!

What is a donut on an engagement ring?

Add a donut, also known as “basket” to your ring. This allows the stone to sit as low as possible, from but does not allow bands to stack flush. It also adds more structure to the piece.

Whats a donut on a ring?

The Donut is the bottom plate of metal at the base of the basket which sits directly on top of the finger. The donut serves a structural purpose as it allows the prongs to have a wider center of gravity which adds lateral stability to a head.

What are the sides of a ring called?

Shoulder: The top two sides of the ring. Side stones: Stones that are on either side of the center stone. Prong: The small metal pieces that hold the gemstone in place.

Which part is the shank on a ring?

The ring shank, or what is commonly referred to as the band, is the portion of the ring that encircles the finger. The shank is an important design element affecting both the appearance of the ring and how it feels to the wearer.

Why are there holes under diamonds in rings?

Naturally, people assume that the holes are there to allow the diamonds air to, well, breathe? But the holes are actually there to make it easy to clean the diamonds, and to make the diamonds easier to set without accidentally chipping the Culet (pointy tip of the diamond).

Do diamonds fall out of rings?

Contrary to popular belief, despite diamonds being one of the hardest substances diamonds will break. Diamonds are extremely hard but also brittle. With enough force, a diamond will break. A complete break across a diamond can sometimes result in the parts of the diamond being lost from the ring.

Which ring goes on the inside?

Tradition says that a married woman should wear her wedding band on the inside of her finger. In other words, it goes on first followed by the engagement ring on the outside. Many say it’s because the wedding band should be the one closest to the heart, but there’s a practical reason, too.