What are mini C-arms used for?

The mini C-arm enables the clinician to obtain dynamic images and perform interventions such as manipulations or injections. The mini C-arm results in a significantly lower radiation exposure for the patients than a formal X-ray.

What is FL C-arm surgery?

Fluoroscopy is an imaging technique to obtain real-time moving images of the internal structures of a patient through the use of a fluoroscope – similar to an x-ray “movie.” A continuous x-ray beam is passed through the body part being examined, and is transmitted to a computer monitor so the body part and its motion …

Do you need to wear lead with a Mini C-arm?

The upshot: Everyone in the room should be shielded during fluoroscopic cases, even staff members who are standing at what they might consider a safe distance from the C-arm. Make lead aprons required wearing wherever C-arms are in use, but don’t rely on them to be your sole defense against radiation exposure.

What does the C in C-arm stand for?

A mobile C-arm is a medical imaging device that is based on X-ray technology and can be used flexibly in various ORs within a clinic. The name is derived from the C-shaped arm used to connect the X-ray source and X-ray detector to one another.

How much radiation do you get from C-arm?

Alonso et al., [17] concluded that the scatter radiation outside 2 meter zone of a C Arm unit is less than 1 mSv [Table/Fig-7].

What is the C-arm injection?

A fluoroscopic guided injection involves injecting medicine directly into the joint under a special form of imaging known as a c-arm. It is used primarily for therapeutic reasons combining a corticosteroid and numbing agent.

How much radiation does a mini C-arm emit?

The average radiation exposure was 50.1 mRem.

What is C-arm in orthopedic?

A c-arm machine is an imaging scanner intensifier. C-arms have radiographic capabilities and are used primarily for intraoperative imaging during surgical, orthopedic, and emergency care procedures. The c-arm is often also known as a portable x-ray and is used for fluoroscopy.

Is C-arm radiation harmful?

Radiation exposure is thus an additional secondary occupational hazard in addition to the hazards of other surgical fields. It should hence be a concern for orthopedic surgeons. Radiation safety precautions should be taken and exposures regularly monitored with at least one dosimeter for monitoring the whole-body dose.

How far away from a mini C-arm is safe?

However, the modest radiation exposure from the mini C-arm to the patient does not substantially change the patients’ yearly radiation exposure. Appropriate precautions such as wearing lead aprons and standing 6 feet away from the C-arm machine when possible are recommended.

How long does a fluoroscopic injection take?

The procedures take between 5-30 minutes.