What is Dell Unified server Configurator?

What is Dell Unified server Configurator?

Unified Server Configurator (USC) is a graphical UI for local access of the Lifecycle Controller features in pre-OS environment. Lifecycle Controller simplifies the end-to-end server lifecycle management. Compatible Systems. PowerEdge R410.

What is lcc Dell?

Dell Lifecycle Controller is an advanced embedded systems management technology that enables remote server management using integrated Dell Remote Access Controller (iDRAC). Using Lifecycle Controller, you can update the firmware using a local or Dell-based firmware repository.

Is Lifecycle Controller same as iDRAC?

The iDRAC9, from Dell, with Lifecycle Controller, is designed to accomplish these enterprise-class management requirements. While the iDRAC is the remote access card that gives access to the hardware status, the LCC will be useful for initial system configuration, local deployments, and firmware updates.

How to connect to Dell Lifecycle Controller?

To enable access to Lifecycle Controller during system startup:

1. Press during POST.
2. Select iDRAC Settings.
3. Select Lifecycle Controller.
4. Under Lifecycle Controller, select Enabled.
5. On the System Setup Main Menu page, select Finish to save the settings.
6. Select Yes to restart the system.

What is Dell USC?

Unified Server Configurator is a graphical UI for 1-to-1 local access in a pre-OS environment. It simplifies OS install and Diagnostics.

What is iDRAC with Lifecycle Controller?

The iDRAC with Lifecycle Controller technology in the server’s embedded management allows you to perform useful tasks such as configuring BIOS and hardware settings, deploying operating systems, updating drivers, changing RAID settings, and saving hardware profiles.

What can iDRAC with Lifecycle Controller be used for?

How do I connect to Dell iDRAC server?

1. Turn on the managed system.
2. Press during Power-on Self-test (POST).
3. In the System Setup Main Menu page, click iDRAC Settings. The iDRAC Settings page is displayed.
4. Click Network. The Network page is displayed.
5. Specify the network settings.
6. Click Back, click Finish, and then click Yes.

What is iDRAC with Lifecycle controller used for?

What is iDRAC and iLO?

iDRAC (Dell) and iLO (HP) are proprietary Intelligent Platform Management Interface (IPMI) technologies that provide remote management options on a device, even when that device is offline. Auvik currently monitors resource and network utilization on the IPMI itself.