How much does a water jet cutting machine cost?

For starters, you can find small waterjet machines at a price point of $60,000. However, those might not give you the best value for money in the long run. If you want to make the most out of your investment, we recommend going with the Techniwaterjet G2 CNC waterjet cutters which starts at $100,000.

How much does a waterjet CNC machine cost?

CNC waterjet machines require an expensive Ultra High Pressure Intensifier pump, so they are going to range from at least $100,000 to as much as $350,000, depending on size and options. Finally, CNC laser machines are usually the most costly.

Can a water jet cut anything?

Materials commonly cut with a water jet include textiles, rubber, foam, plastics, leather, composites, stone, tile, glass, metals, food, paper and much more. “Most ceramics can also be cut on an abrasive water jet as long as the material is softer than the abrasive being used (between 7.5 and 8.5 on the Mohs scale)”.

Can a water jet cut glass?

From cutting of intricate stained glass, to piercing holes in glass, to easily cutting laminated ballistic glass, users from a variety of industries have discovered the versatility and cost-effectiveness of cutting glass materials with waterjet technology.

How thick can a waterjet cut?

10-12 inches
For hard materials, the maximum cutting thickness of waterjet cutters is taken to be between 25-30 cm (10-12 inches). It is possible to cut an even more thick material, but it can make the process slower than required.

Is water jet cutting expensive?

Therefore, on average, you are going to be spending between $18 to $36 per hour on abrasive. Assuming 6 hours of cutting time per day, that’s $110 to $220 of abrasive per day, or $550 – $1,100 per week, $2,200 to $4,400 per month, $26,000 to $55,000 per year.

Can water jet cut skin?

Water blasting injuries are similar to gunshot wounds but have the added danger of introducing contaminated water into the wound. If the water jet cuts through a shoe or sleeve and punctures the skin, it may only appear as a small bruise.

What waterjet Cannot cut?

A water jet would not cut through diamond or tempered glass – with tempered glass the material would break as designed to when force is applied.

How many PSI is a water jet?

Typical waterjet cutting pressure is between 50,000 and 60,000 PSI. Many newer systems are pressurized up to 90,000 PSI. The water at this pressure is then released through a small orifice machined into a diamond or saphire, usually in the range of 5 to 15 thousandths of an inch diameter.

How thick can you cut with a water jet?

How thick can an abrasive waterjet cut? The high-level answer is that abrasive waterjets can cut through 12 inches of most materials. Many users report cutting material even thicker than that. Most abrasive waterjet cutting, however, is done in material that is 3 inches thick or less.