How do you reset an Ohaus scale?
How do you reset an Ohaus scale?
- Step 1: Press & hold the ON/ZERO button until you see MENU on the display.
- Step 2: Release the ON/ZERO button. Display should now read .C.A.L.
- Step 3: Press the ON/ZERO button one time (do not hold). Display should briefly flash -C- and then.
How do you unlock the Ohaus scale?
OHAUS locks the balance pan for shipping. You will find the locking knob on the underside of the balance pan. Turn the knob to unlock the balance.
How do you change units on Ohaus scale?
To change units, press and hold SELECT; press M+ Unit until the desired unit icon is displayed. Use this mode to store the weight and HI, LO, SUM statistics from a series of samples. (See Instruction Manual for details.)
How do you calibrate a balance step by step?
Steps to calibrating an electronic balance
- Turn on the electronic balance.
- Ensure it is levelled and stable; and is placed away from any draughts.
- Enter the balance into Calibration Mode (instructions for this will be found in the product manual).
- Select Span Calibration (as per the manufacturer instructions)
How do you calibrate an Ohaus Pioneer scale?
2.5 Initial Calibration Power on the balance by pressing O/T. Press and hold Print/Cal until [CAL] is displayed. The display flashes the calibration mass needed. To select the alternate calibration weight press No.
How do you adjust an Ohaus triple beam balance?
ACTION: Click and drag the weight to remove it from the end of the beam. Step 3: Set all three weight poises to the zero setting. ACTION: Click and drag each weight poise to its zero position on the left. The balance is now ready to zero.
What is balance calibration?
Calibration is defined as an association between measurements and is essential to achieve accurate weighing results. Calibration of balances is carried out to ensure that they are correctly displaying the correct measurement according to their countries standards.
When should a balance be calibrated?
For the best accuracy, the balance should be calibrated regularly or if the local ambient temperature changes more than two degrees Celsius and you are making high-accuracy measurements.
What is OHAUS cd-11?
1.1 Introduction Nous vous remercions de votre achat d’un indicateur CD-11 de Ohaus. L’indicateur Ohaus CD-11 est un indicateur de poids électronique, solide et fiable spécialement conçu pour faciliter le pesage.
What is the setup of the cd-11?
Le menu SEtuP de l’indicateur CD-11 doit être activé la première fois que l’indicateur est utilisé pour faire corres- pondre les paramètres de base de la balance avec l’indicateur. N’essayez pas d’étalonner l’indicateur avant d’avoir défini les paramètres dans le menuSEtuP.
What should I do if my OHAUS Scale is not connecting?
If your Ohaus Scale issue appears unrelated to Bluetooth and Canix connectivity, please contact the Ohaus Support Line at 1-800-672-7722, open Monday-Friday between 8 am – 5 pm PST.