Why is the orange light blinking on my Motorola modem?

When the light is flashing, the modem is scanning for the network configuration server connection. A solid light indicates the connection is acquired. When the light is flashing, the modem is transmitting or receiving data. When the light is off, the modem is not transmitting or receiving data.

How do I reset my Motorola Surfboard SB6121 modem?

Resetting the SB6121

  1. Disconnect the coaxial cable.
  2. Power cycle the unit by disconnecting the power cord for 10 seconds, then reconnect the power cord.
  3. Click the Configuration link on top.
  4. Click the Reset All Defaults button (as shown below).
  5. When asked, Do you want to proceed?, click the OK button.

How do I fix my surfboard SB6121?

Power Reset

  1. Shutdown the computer.
  2. Unplug the cable modem from the AC wall outlet and wait one minute.
  3. Plug the cable modem into the wall outlet.
  4. Wait until the Power, Receive, Send, and Online LEDs are solid.
  5. Restart the computer.

What do the lights on my surfboard modem mean?

If the sending light is off or blinking, your modem isn’t sending data properly. If the online status light is off or blinking, your modem is connected but something is preventing online access. If the PC/Activity light is off or blinking, there may be a problem with the connection between your computer and the modem.

How do I fix the orange flashing light on my modem?

You can resolve the Arris modem DS light blinking orange by supplying adequate power, using proper cables and splitter, resetting your modem or by getting in touch with your ISP.

What does blinking orange light on router mean?

The blinking orange light on the Xfinity gateway means it is probably connecting to the Xfinity network. You may have trouble connecting to the internet because a firmware upgrade might be going on. It could also be blinking orange due to a service outage, faulty router/modem or a defective splitter.

Is surfboard SB6121 obsolete?

The SB6121 is being phased out and replaced by the SB6141. However there are many SB6121s still available for purchase, and we’ll continue to provide technical support for this device.

How do I setup my Motorola Surfboard SB6121?

To Install SB6121

  1. Connect one end of the coaxial cable to the cable outlet or splitter.
  2. Connect the other end of the coaxial cable to the cable connector on the SB6121.
  3. Plug the power cord into the power connector on the SB6121.
  4. Plug the power cord into the electrical outlet.

How do I reset my surfboard modem?

How to Reset a Surfboard Cable Modem

  1. Unplug the power cable. Unplug the power cable from the back of the modem.
  2. Wait 30 seconds. Wait at least 30 seconds.
  3. Modem.
  4. Router.
  5. Open a Web browser and browse to “192.168.
  6. Click “Reset All Defaults”
  7. Browse the Web.

Why are my modem lights blinking?

A blinking light means you are having difficulty connecting to the internet. Ensure all telephone cable connections are tight and secure and reboot the modem and router (if applicable). POWER: A solid green light indicates the unit is properly connected to power. A blinking red light indicates a possible modem failure.

Why is the link light blinking orange on my Arris modem?

If your Arris modem US/DS light is blinking orange, it means there is a disconnect in the US communication line even though the DS has seen and locked down the downstream signal. To solve this issue, you will need to recheck all your cable wiring for any defects.

Why is my light blinking orange?

Another reason for the orange blinking light can be a damaged or malfunctioning splitter. Service outage because of bad weather or scheduled maintenance. A defective router or modem can be the reason as well.