How do you weld a 1G pipe?
How do you weld a 1G pipe?
1G Position In the 1G welding position, the pipe is in the horizontal position and can be rotated along the horizontal (X) axis. The welder’s position remains stationary. Welding is performed on the top of the pipe. This is the most basic welding position that can be performed.
What is a 1G weld?
Flat Position (1G or 1F) This type of welding is performed from the upper side of the joint. The face of the weld is approximately horizontal. Flat welding is the preferred term; however, the same position is sometimes called downhand.
What are the GS of welding?
To help operators understand the type of weld joint (fillet or groove) and the weld position, each weld is given a number and a letter — 1G, 2G, 3G, 4G or 1F, 2F, 3F, 4F — to indicate the position and the type of weld required. Welds with a 1 are flat position, 2 is horizontal, 3 is vertical and 4 is overhead.
How hard is a 6G weld test?
The 6G pipe weld is one of the most difficult weld certification tests to pass because the pipe is at a 45-degree angle and immovable. Welders performing the 6G certification test must weld in all positions including horizontal, vertical and overhead, and may have to weld both right-handed and left-handed.
What is 5G pipe welding?
In the 5G position, the pipe is fixed at one or both ends and the welding operator must travel in one of two directions, either vertical-up or vertical-down. Depending on the location of the pipe, the application may also require welding either overhead or in a flat position.
What position is 3 G in welding?
Welding in a 3G position means moving the torch vertically, up and down across a surface. This is in contrast with 1G (flat surface welding), 2G (horizontal welding), and 4G (overhead ceiling welding).
What is a 2G welding test?
A 2G weld test checks your proficiency at producing welds that meet specific criteria for the finished weld and includes: Welding two horizontal beveled plates. Proper setup. Making the weld with or without a backer plate. Passing a final review or other tests.
