Can you use 407C in a heat pump?

Work in existing medium-temperature applications. Work in new or existing residential and commercial AC and heat pumps.

What are the normal operating pressures for 407C?

Re: R407c Pressures If this is so always evaporating above zero, 4 or 5 deg celcius, R407c will have a low pressure (suction ) of about 50 psi. and a high pressure ( discharge ) of about 280 psi, which is about 55 deg celcius, cooling cycle.

Is R407C refrigerant flammable?

R-407C is not flammable at ambient temperatures and atmospheric pressure. However, this material will become combustible when mixed with air under pressure and exposed to strong ignition sources.

Can you mix R22 and R407C?

4. R-407C should be used only in systems that currently use R-22. It should not be mixed with R-22 or any other refrigerant.

IS 407C high pressure?

One benefit of using R-407C at high-ambient conditions is that it operates at relatively low pressure.

What should superheat be for 407C?

Example: The pressure measured at the TEV bulb is 79 psig. The Pressure/Temperature (P/T) chart shows that the saturated vapor temperature, at the dew point, of R-407C for 79 psig is = 51°F. If the actual refrigerant temperature is 60°F the superheat is 9°F.

What is the boiling point of R-410A?

-55.3°F (-48.5°C)R-410A / Boiling point

What type of refrigerant is R-407C?

R-407C is a non-azeotropic mixed refrigerant composed of the three ingredients R-32, R-125, and R-134a, and was developed as a substitute refrigerant for R-22, used in applications such as air conditioning equipment and chiller equipment for medium temperature ranges.

Can you top off 407C refrigerant?

Yes. It is a blend of HFC-32, HFC-125, and HFC-134a (23/25/52 wt%). Freon™ 407C can be topped off after a leak, multiple times, with minimal impact on system performance.