Is por-15 hazardous?

Is por-15 hazardous?

Harmful: danger of serious damage to health by prolonged exposure through inhalation. Possible risk of harm to the unborn child. Harmful: may cause lung damage if swallowed.

Is por-15 solvent based?

POR-15 Solvent is the only appropriate clean up solvent or coating thinner when painting with a spray gun for most POR-15 coatings.

What is por15 made of?

We make a product called ‘Metal-Ready’. It’s a rust remover that leaves a zinc phosphate coating on base metal, the perfect preprimer for POR-15. NOTE: New steel is coated with a protective oil finish at the mill.

Is por-15 water resistant?

POR-15 High Temp paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling. It is also extremely weather, salt and moisture resistant….

Do you need a respirator for POR15?

I will give some warning wiht POR15-If you spray it, you absolutly HAVE to use a respirator, preferrably a fresh air type, though a high quality charcoal filter type will do. The minimum requirement for a respirator is listed on the can.

Is POR15 flammable?

This will allow better adhesion of POR-15 Rust Preventive Coating or any other paint / primer. POR-15 Metal Prep is not caustic, corrosive, toxic or flammable.

Can you thin POR-15 with acetone?

The reason you can not use normal acrylic thinners with POR-15 is because it has a water content to high (about 0.05%), the reason for this is that the ~%50 acetone in most thinners absorbs water from the atmosphere. For this same reason 100% acetone can not be used as it will absorb water while being used.

Is por 15 top coat fuel resistant?

The sealer included in the POR-15 kit chemically bonds with the metal, stops further rusting and is said to be resistant to all fuels, alcohols and additives—like painting a new tank inside the old one.

What is POR-15 Metal Prep made of?

zinc phosphate metal
METAL-READY™ is a water-based, zinc phosphate metal etching and preparation solution that is non-toxic, non-flam- mable, non-caustic, and non-corrosive. It etches metal to provide surface profile for superior organic coating adhe- sion on steel, aluminum, and galvanized metal.

Is POR-15 an epoxy?

Amazingly, this two-part epoxy putty even sticks to damp surfaces, and will cure Underwater, so it can be used to fix leaking basement walls, swimming pools, plumbing fixtures, and so much more. Put some POR-15 Epoxy Putty In your toolbox today. You’ll find yourself using it all over your shop and home.