Is a 2500 stall converter good?
Is a 2500 stall converter good?
For mild performance cars with something like a 350 HP engine, a 2,200 – 2,400 stall is about right. The basic rule of thumb is; if your engine “comes alive” at say, 3,500 RPM, then you want a stall converter with about 3,500 of stall to it.
What does a 2500 stall converter do?
A 2,500 stall speed doesn’t mean you need to rev the motor to 2,500 rpm for the vehicle to move.” What it does mean in this case is 2,500 rpm is the limit at which the converter will hold back the engine speed if transmission output is prohibited.
What RPM is a stock stall converter?
around 1,800-2,000 rpm
Stock torque converters generally have a stall speed around 1,800-2,000 rpm. Higher stall speeds become necessary when horsepower and torque happen at higher rpm ranges. You want stall speed and maximum engine torque to happen around the same rpm range.
Do you need a tune for a stall converter?
It will be fine. More stall than that you’ll definately need a tune.
What happens if stall speed is too high?
Converter stall speed must be high enough to put the engine into the torque range where it can most efficiently launch the car. If converter stall speed is too low, the car will be lazy leaving the line; if too high, there’ll be excessive high-gear slippage—either case adds time to your e.t.
How do I choose a stall speed converter?
When choosing the stall speed that is right for your application, a rule of thumb is that the advertised stall speed will need to be at least 500 rpm higher than the beginning of the camshaft’s powerband. All aftermarket camshafts are delivered with a recommended RPM operating range.
What is the advantage of a high stall torque converter?
A higher stall torque converter will let your car accelerate better because the car will be taking off at the rpm range where it is making the most power.
How much does a stall converter cost?
Most auto repair shops will charge someone anywhere from $600 to $1000 for a torque converter replacement job. If you would rather do the replacement job yourself, then a new torque converter will cost anywhere from $150 to $500. The exact cost depends on the make and model of your vehicle.
