Why is my Kwikset Smart lock not locking?

Check that the bolt hole is at least 1” deep so the bolt fully extends. Check that the door closes properly so that when the deadbolt is extended, it is going into the bolt hole and not hitting the deadbolt strike or door frame. Check that the mounting screws securing the exterior keypad are not over-tightened.

Do Kwikset locks lock automatically?

Auto-lock automatically re-locks the door after unlocking. This feature is set to 30 seconds and is turned off by default.

How do I turn off auto lock on Kwikset 913?

Make sure switch #3 is on, and press the Program button once. If you don’t immediately hear three beeps and see the keypad fl ash green three times, the Mastercode is disabled. Note: The lock will time out after five seconds.

Why is my keypad door lock not locking?

If you find that the issue is the lock, try rebooting the lock first. To reboot the lock, remove one battery from the lock and replace it. Once you have rebooted the lock, try the entry code again. If this does not work, the keypad must be reset.

Why is my Kwikset keypad not working?

If the keypad is still dead, change the batteries and turn switch 3 to the on position to run a test. Press every key once and make sure it beeps. If some of your buttons still don’t respond, it’s time to call technical support for further testing.

What is Kwikset auto lock delay?

The Auto-Lock feature automatically re-locks your door 30 seconds after unlocking. This feature is off by default, but you may enable it inside the Premis app. You may also adjust the time delay (between 30 seconds and 4 minutes) within the app.

What is autolock Kwikset Halo?

Auto-lock is an optional re-locking feature whereby the Halo deadbolt re-locks itself after a selectable time delay after it’s been unlocked.

What is auto lock delay Kwikset?